Want to Buy Looking for an f-stop type enlarger timer

Trader history for tedr1 (0)

tedr1

Member
Joined
Feb 3, 2016
Messages
940
Location
50 miles from NYC USA
Format
Multi Format
I am in the USA and looking for an f-stop timer, one possibility is the RHDesigns from the UK, the other is the Darkroom Automation unit that unfortunately seems to be unavailable new. I am open to suggestions of other timers that operate on the f-stop principal (but not open to electronic project suggestions!). I would be grateful for recommendations of other models to look for and for offers of either the Darkroom Automation model and RH Designs model.
 

RalphLambrecht

Subscriber
Joined
Sep 19, 2003
Messages
14,693
Location
K,Germany
Format
Medium Format
f/stop timing is great but you can do it from a list with any timer!
 

ann

Subscriber
Joined
Sep 10, 2002
Messages
3,336
Format
35mm
f/stop timing is great but you can do it from a list with any timer!
We use this method in my classes however we can't afford the timer and do the math the old fashion way
 
OP
OP

tedr1

Member
Joined
Feb 3, 2016
Messages
940
Location
50 miles from NYC USA
Format
Multi Format
Thank you for your comments. I am setting up a darkroom for the second time and have used the mental arithmetic method for all the work in my previous darkroom. Yes, I agree there are aids to make the computation less demanding of brain power, which has faded in the 20 years since I last printed I shall probably begin by using the f-stop timing charts available at http://www.largeformatphotography.info/ (thank you Mr Lambrecht) while I save up the money for an RHD. It's a shame Darkroom Automation has exited the business.
 

ann

Subscriber
Joined
Sep 10, 2002
Messages
3,336
Format
35mm
There are several charts available which makes life easier. Check out Tim Rudman's book on black and white printing

I just copied the page and posted it at our viewing station for all to use
 

RalphLambrecht

Subscriber
Joined
Sep 19, 2003
Messages
14,693
Location
K,Germany
Format
Medium Format
If you have a Gralab timer,you can print an f/stop timing clock face for it but the RHDesign stop clock is your best solution.
 
OP
OP

tedr1

Member
Joined
Feb 3, 2016
Messages
940
Location
50 miles from NYC USA
Format
Multi Format
I am getting on fine with the LPL electronic timer, very precise and repeatable, I have your f-stop chart pinned up on the wall next to the enlarger
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…