IS anyone out there still grinding cams for linhof Tech III's
Linhof TechIII
-
A
- Thread starter ronlamarsh
- Start date
Recent Classifieds
-
For Sale Koni-Omega Rapid 200 6x7 90mm f3.5
- Started by jordanka16
-
For Sale Ilexpo 9x9 lens adapter /shutter for 6 3/4 in lens board
- Started by diversey
-
For Sale Zenza Bronica 80mm lens
- Started by Drew B.
Forum statistics
- Joined
- Jan 27, 2005
- Messages
- 122
- Format
- Multi Format
infinity marks
Hi there.
I recently bought a very, very old tech III, and found that a previous owner had made marks for 160mm lens. Or so I thought. When I took it out, I found that it was incorect, it seemed to be slightly further back. Anyway, can anyone out there explain to me how I go about doing this myself? I thought that the lever on the right side (when facing the lens) that falls down pointing on the scale, was the "mark" , but it actually points to inf. on the 16cm lens mark, and it is still off.
Jon Wang
Hi there.
I recently bought a very, very old tech III, and found that a previous owner had made marks for 160mm lens. Or so I thought. When I took it out, I found that it was incorect, it seemed to be slightly further back. Anyway, can anyone out there explain to me how I go about doing this myself? I thought that the lever on the right side (when facing the lens) that falls down pointing on the scale, was the "mark" , but it actually points to inf. on the 16cm lens mark, and it is still off.
Jon Wang
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |