Lens hood size for 135mm Zeiss Tessar?

[Anton Lukoszevieze]

I am stupid or its Sunday. I cannot work out what size lenshood I need for a 135mm Zeiss Tessar 4.5 lens from 1930/1. It is not here yet, so I cannot measure it.
Is it 42mm push on or 52mm, can't work it out even from literature.....duh

 

[archphoto]

Just be patient and measure when it is in, then you will know for shure.

Peter

 

[Anton Lukoszevieze]

There goes a wise man.

 

[Mike Kennedy]

Ole' St. Nick was kind to me this year and left a nice digital caliper.Invaluable for measuring.

 

[Anton Lukoszevieze]

Digital!!! Oh the horror!!

 

[Ian Grant]

One of my f4.5 135mm Tessar's is here with me in Turkey on a Patent Etui, it's the same version as yours. The lens cap of my late production f5.6 150mm Xenar would only fit if forced on and stretched that's a 36mm fit. So I'd say it needs a 37mm push on Lens hood.

My other f4.5 135mm Tessar is a later version, the lens barrel is different much thicker walls and it's in a rimset Compur that takes a 39mm filter and I'd guess would need a 42mm push on lens hood. The cells from the Rimset Compur & Dialset Compur aren't interchangeable the shutters are different internal diameters and threads are different sizes.

Ian

 

[Anton Lukoszevieze]

Thanks Ian, that is very helpful!

 

[ChuckP]

On mine with rimset Compur I use a Kodak 42mm push on VI adapter.

 

[Ian Grant]

On mine with rimset Compur I use a Kodak 42mm push on VI adapter.

What's the filter thread Chuck.

My f4.5 135mm Tessar cells are in the UK so I can't check, but I think that the thread is smaller than 40.5mm which is the filter thread size of my f4.5 T coated 150mm Tessar cells that I swapped them with. I'm sure when I bought the lens with a Crown Graphic it came fitted with a 39mm--58mm stepping ring for filters. Both front cells are 42mm OD, and fit rim-set Compur/Coplal 1 shutters.

Ian

 

[JPD]

I have one 135/4,5 Tessar in a dial-set Compur that takes 37mm, and one in a rim-set Compur that takes 42mm. My guess would be 37mm, but measure it when it arrives.

 

[ChuckP]

What's the filter thread Chuck.

My f4.5 135mm Tessar cells are in the UK so I can't check, but I think that the thread is smaller than 40.5mm which is the filter thread size of my f4.5 T coated 150mm Tessar cells that I swapped them with. I'm sure when I bought the lens with a Crown Graphic it came fitted with a 39mm--58mm stepping ring for filters. Both front cells are 42mm OD, and fit rim-set Compur/Coplal 1 shutters.

Ian

Trying to eyeball it with a ruler it looks like 39mm is correct for the filter threads. This is for the rimset Compur version 135mm f4.5.

 

[DannL]

Just to add/repeat the advice given thusfar, I used the Zeiss/Ikon Sonnenblende A37 1112. It fit inside the Tessar 135, and would fit over a Skopar 135.

 

[Anscojohn]

I am stupid or its Sunday. I cannot work out what size lenshood I need for a 135mm Zeiss Tessar 4.5 lens from 1930/1. It is not here yet, so I cannot measure it.
Is it 42mm push on or 52mm, can't work it out even from literature.....duh

*****
It is possible it may be neither. Some German lenses actually used the Eastman "Series" threading.

 

[JPD]

Just to add/repeat the advice given thusfar, I used the Zeiss/Ikon Sonnenblende A37 1112. It fit inside the Tessar 135, and would fit over a Skopar 135.

Then your Tessar takes 42mm filters/hood.

Btw, the threads on these older Tessars are for the front element retaining ring only, and not for filters.

 

[DannL]

Then your Tessar takes 42mm filters/hood.

Btw, the threads on these older Tessars are for the front element retaining ring only, and not for filters.

Ahhh, no wonder it worked so well.

 

[JPD]

Ahhh, no wonder it worked so well.

Haha

No, actually I wrote the "btw" part so that no one would buy 35,5mm filters to find out that the thread pitch is wrong.