Lens element swap?

End Table

A
End Table

  • 1
  • 1
  • 52
Cafe Art

A
Cafe Art

  • 8
  • 3
  • 177
Sciuridae

A
Sciuridae

  • 6
  • 3
  • 181
Takatoriyama

D
Takatoriyama

  • 6
  • 3
  • 173

Recent Classifieds

Forum statistics

Threads
197,658
Messages
2,762,534
Members
99,431
Latest member
Toastiee
Recent bookmarks
0

jolefler

Member
Joined
Mar 25, 2006
Messages
415
Location
Northeast Oh
Format
Multi Format
Hi folks...new to computers (first post), please bear with me. I use an old 13.5cm Tessar on my 4x5. The front element has a good sized nick in the glass which I blacked-out. I haven't been able to pick up any negative affects under a loupe, but don't enlarge prints to any great size. Recently I purchased a front element, in good shape, for the same glass (except barrel mounted). As I understand it, front and rear elements are matched....should I bother having the front elements swapped by a photo-machinist, or would the results possibly be worse than what I have now. Since the shutter and barrel threads differ, it's not just a screw out/in procedure...I'm somewhat sure both front elements would have to be dis-assembled to pull off the swap. Opinions, please.
 

Dave Parker

Member
Joined
Aug 14, 2004
Messages
4,031
Format
Multi Format
If your not showing any negative artifacts in your pictures, I would not worry about it, a nick normally if bad can change contrast or flare possibilities in images, the front element can actually take quite a bit of abuse before showing much, I would think the cost would be quite high as everything would have to be placed right and calibrated to ensure alignment. Like I said, if your not showing any artifacts in your images, I would not worry about it.

Dave
 

avandesande

Subscriber
Joined
Sep 7, 2002
Messages
1,343
Location
Albuquerque, NM
Format
Med Format Digital
Photo machining is very expensive and really only worth it for rare protar sets and 19" Dagors. There are others too but I know tessars aren't one of them.
If you are handy with tools and can get a spanner wrench it wouldn't hurt taking them apart and switching elements. If it takes lousy pictures you know the elements arent matched very well.

I would tell you not to bother with any of this but nobody ever seems to take this kind of advice.
 

Ole

Moderator
Moderator
Joined
Sep 9, 2002
Messages
9,244
Location
Bergen, Norway
Format
Large Format
If it needs machining to swap the elements, it will probably be more expensive to get it swapped (and the spacing correct) than to get a new old lens. Or two.

If it gives no negative effects, I would keep on using it. One of my favorite lenses has a deep scratch in the rear element, it still takes great pictures.
 
OP
OP

jolefler

Member
Joined
Mar 25, 2006
Messages
415
Location
Northeast Oh
Format
Multi Format
Thanks, folks!

I believe I'll leave well enough alone, based on the advise. Perhaps if I fall in love with another of my focal lengths I'll try it myself. Doh!
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom