Leitz Focomat V35 Enlarger

[thefizz]

I need to find variable contrast filters for a Leitz Focomat V35 Black & White enlarger. I understand this enlarger is for graded paper but I believe you can get under the lens filters. As these may affect the quality of the print, is there any other way of fitting filters into the enlarger head?

Peter

 

[clogz]

Hello Peter,
In the days when the V35 was still for sale new, you could buy either an optional Multigrade or colour module. They must still be available on fleabay. Another option are the Ilford Multigrade under the lens filters. They work ok.
Hans

 

[mmcclellan]

Peter,

Does yours have the color module? If so, just dial it in -- I can send you a scan of a filter chart for the V35 that shows what filtration to use for the Ilford contrast grades.

Otherwise, you can always buy the acetate filters and just lay them on TOP of the negative or get the Ilford/Kodak under-the-lens filter kits and use them.

Otherwise, I've used the plastic filters under the lens without any problem -- just be sure to focus through the filter and not insert them after focusing for max sharpness.

 

[thefizz]

Thanks Hans & Michael. I wish it was the colour version but unfortunately its the B&W version for graded paper. Would the acetate filters placed on top of the negative be a better option than the under the lens filters?

 

[Fintan]

Can you remember if there is a swinging safelight filter for under the lens. That could hold a multigrade filter.

 

[thefizz]

No swinging filter Fintan. The safelight filter is built into the enlarger head and turned on and off by a little knob/lever.

 

[Fintan]

this is what you need partner

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280162952571

 

[Alan9940]

I need to find variable contrast filters for a Leitz Focomat V35 Black & White enlarger. I understand this enlarger is for graded paper but I believe you can get under the lens filters. As these may affect the quality of the print, is there any other way of fitting filters into the enlarger head?

Peter

Hello Peter,

I would fit a gel filter on top of the neg carrier before I'd ever use one under the lens but, seriously, if you plan to or do a lot of VC printing on your V35 I'd spring for the multigrade or color head. The use of gels, especially on the neg carrier make it nearly impossible to apply different contrast levels within the same print. I know because I've worked this way for years on my Beseler 45X enlarger with Aristo head.

Good luck.

Regards,
AlanH

 

[Fintan]

this might do fizz

http://www.thedarkroom.co.uk/products_class.php?productID=1601

 

[mmcclellan]

Peter,

The gels on TOP of the negs will be great as long as you're not trying to do split grade printing. If the latter, you'll need to be able to switch filters and for that you'll need to have them below the lens or have the colorhead. If you're just doing single grade, though, laying the gels on top of the neg will work great.

 

[david James lee]

i have a color module if you are interested. davidjameslee@gmail.com