Here's a really nice Telyt 200 f/4 from about 1960, in its original, number-matching box, and in near mint condition.
This second-version Telyt 200 is a Walter Mandler-designed lens with improved color correction, compared to the first version.
Cosmetic condition is very clean, with only a very few and tiny areas of black finish loss at a couple of spots around the focus ring. Hardly a mark to be seen anywhere else. The front cap also has a couple of tiny spots of paint loss along the outer edge, while the front is completely perfect.
The glass is likewise very nice, with only a couple of very faint cleaning marks to be seen with the aid of a flashlight, and the usual few bits of internal dust. Aperture blades are clean. As you may know, this lens is one of those with the preselector ring as part of the aperture controls. Once you set the desired aperture you can use the silver, non-indented ring to quickly shift between fully open (for easier focusing) and the stopped down setting for shooting. Minimum aperture is f/22.
The built-in, telescoping hood is in perfect order. And the lens head is removable for use with other devices such as the Bellows II or Focorapid.
The lens is, of course, a screw mount and so will fit directly to the Visoflex I housing. For use with the Visoflex II or III you'll need the OUBIO/16466 (see below).
$275 shipped within the US.
OUBIO/16466 adapter
Also in super clean condition. M-mount at the back for attaching to Visoflex II or III housings, and screwmount in front for the Telyt 200, 280, etc.
One nice feature is the little switch that allows the camera/Visoflex/lens system to be rotated to vertical while the main body of the OUBIO stays still (attached to a tripod). I've owned another one of these that had an issue with the rotating function (very loose and imprecise) but this one is perfect.
$60 shipped within the US.
International buyers are welcome but please contact me to get a shipping quote.
Also will be listing a Visoflex IIa and some other bits so look for those as well!
Thanks,
James
This second-version Telyt 200 is a Walter Mandler-designed lens with improved color correction, compared to the first version.
Cosmetic condition is very clean, with only a very few and tiny areas of black finish loss at a couple of spots around the focus ring. Hardly a mark to be seen anywhere else. The front cap also has a couple of tiny spots of paint loss along the outer edge, while the front is completely perfect.
The glass is likewise very nice, with only a couple of very faint cleaning marks to be seen with the aid of a flashlight, and the usual few bits of internal dust. Aperture blades are clean. As you may know, this lens is one of those with the preselector ring as part of the aperture controls. Once you set the desired aperture you can use the silver, non-indented ring to quickly shift between fully open (for easier focusing) and the stopped down setting for shooting. Minimum aperture is f/22.
The built-in, telescoping hood is in perfect order. And the lens head is removable for use with other devices such as the Bellows II or Focorapid.
The lens is, of course, a screw mount and so will fit directly to the Visoflex I housing. For use with the Visoflex II or III you'll need the OUBIO/16466 (see below).
$275 shipped within the US.
OUBIO/16466 adapter
Also in super clean condition. M-mount at the back for attaching to Visoflex II or III housings, and screwmount in front for the Telyt 200, 280, etc.
One nice feature is the little switch that allows the camera/Visoflex/lens system to be rotated to vertical while the main body of the OUBIO stays still (attached to a tripod). I've owned another one of these that had an issue with the rotating function (very loose and imprecise) but this one is perfect.
$60 shipped within the US.
International buyers are welcome but please contact me to get a shipping quote.
Also will be listing a Visoflex IIa and some other bits so look for those as well!
Thanks,
James
