• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Kodak Photo-Flo 200 Dilution?

please define what's a typical diluition
sure photflo can also be used at 1:infinite LOL

Depends on the label, some are PhotoFlo 200 and others are PhotoFlo 600. Read the label and flow the instructions.
 
please define what's a typical diluition
sure photflo can also be used at 1:infinite LOL
The "Typical" refers to the fact that many of the chemicals on that chart can be used at a variety of dilutions, so the chart indicates which one is referred to.
The instructions on the bottle say: "Dilution: Dilute in the ratio of 1 part Photo-Flo solution to 200 parts water."
 
exactly;2cc/400ccof water,1+200,1:200,5ml/1l; it's all the same. a drop or two are enough. this thread is over discussed by now. let's move on.
 
my experience is similar to yours; far less than 1:200;a drop per500ml is plenty; otherwise, I get watermarks.
 
SEVEN PAGES on PhotoFlo? Egad.

  • Photo Flo standard dilution in one in 200 (not 1 plus 199 though it makes no practical difference) Ilford calls this 1+200 Kodak calls is 1:200.
  • I use two rinses at the end of 35mm processing since the darn holes trap water, one with plain distilled then one with PhotoFlo and with distilled I find I can use 1+300 or even 1+400. The only squeegee I use are my two fingers, I used to use Photowipes on the back only of 35mm films but PhotoWipes are really tough to find and probably no more when my current stash are gone.
  • For 120 etc. I find that just a final dip in PhotoFlo is enough.
  • Note that if you use tap water or boiled water you need to test.
  • I'm not doing production work and don't save my PhotoFlo to use another day though I might reuse it on the same day.
 
I think reusing it the same day and otherwise, make fresh is a sensible approach.
 

Me too.
 
exactly;2cc/400ccof water,1+200,1:200,5ml/1l; it's all the same. a drop or two are enough. this thread is over discussed by now. let's move on.

It's a mere "serfacant" , has nothing to do with wash or development or with dust spotting. It just prevents water from beading up and depositing whatever minerals it happens to hold.

Its a very simple detergent. You could use dishwashing liquid if that didn't have lots of secondary crapola in it, such as perfume.

Dip your film in it after washing..only takes a second.

https://www.britannica.com/science/surfactant
 

Perfumes are typically in formulations at 0.03%. I doubt that would do anything to film. They are extremely volatile and evaporate like solvents.
 
Perfumes are typically in formulations at 0.03%. I doubt that would do anything to film. They are extremely volatile and evaporate like solvents.

IDK PE says differently, theres all sorts of stuff in dish soap and jet dry ( another favorite for cheapskates ) photoflo costs very little its amazing people waste their efforts on other stuff
( other stuff does not include other photographic products sold as end run, like sprint end run, LFN &c )
i mean even at 200:x &c its still like .001¢ a use ... i guess the problem is that it doesn't soften your hands as you do the dishes, i mean rinse your film ...
 

As you and I have discussed before, we know that PhotoFlo and Edwal LFN are just so, so expensive. Why for what those costs, one could afford to put money in a parking meter!