belaire
Allowing Ads
I'm selling my Jobo CPP2. It includes everything shown here
(yes, the expert drum, too, detailed below). I'll also include a 2500 multitank drum with extension 
. This is the last of my jobo gear.
Serial number is 12422. I tested it right after I took these photos and everything is working as expected. Temperature is accurate within about 0.2 degrees F of my most accurate thermometer. Motor works properly and the pump functions as it should. There are no worrisome noises coming out of the machine.
The backside of the lift has a good bit of scratching.
This was due to my overly aggressive effort to remove some sticky residue left from tape that had been left there for several years. It has no effect on function, of course.
In order to support the expert drums, I've installed the extended support on the Jobo lift. I also will include the original support that is shorter and has the white rollers. Between the white rollers and the adjustable black rollers, the extended support will allow for the use of 1500, 2500, and expert series Jobo drums. The dual cog connector
has a selector for the lower or upper cog, which is necessary depending on which drum you are using. Pretty slick bit of mechanics.
Overall, this processor is in very good to excellent condition. It even has the original quality assurance tag from Jobo.
The expert drum is for prints. As is the 2500 series drum. Both are in very good condition.
Unfortunately, the processor won't be cheap to ship. It will ship from Oak Harbor, WA 98277. The box's dimensions are 48" long x 24" high x 22" wide. The weight is about 40lbs. With that information, you can check on the shipping costs. I'm willing to send it anywhere in the world, but if you are outside the US, you take the risks. If you are in (or coming to visit) Washington state, I'm willing to meet you within a reasonable distance from northern Whidbey Island.
I'm asking $850 plus shipping. I'll cover the PayPal fees. If you are interested, PM me. Feel free to make a reasonable offer. I'd rather see this go to a good home here than have to deal with that auction site
Thanks for looking!
(yes, the expert drum, too, detailed below). I'll also include a 2500 multitank drum with extension . This is the last of my jobo gear.Serial number is 12422. I tested it right after I took these photos and everything is working as expected. Temperature is accurate within about 0.2 degrees F of my most accurate thermometer. Motor works properly and the pump functions as it should. There are no worrisome noises coming out of the machine.
The backside of the lift has a good bit of scratching.
This was due to my overly aggressive effort to remove some sticky residue left from tape that had been left there for several years. It has no effect on function, of course.In order to support the expert drums, I've installed the extended support on the Jobo lift. I also will include the original support that is shorter and has the white rollers. Between the white rollers and the adjustable black rollers, the extended support will allow for the use of 1500, 2500, and expert series Jobo drums. The dual cog connector
has a selector for the lower or upper cog, which is necessary depending on which drum you are using. Pretty slick bit of mechanics.Overall, this processor is in very good to excellent condition. It even has the original quality assurance tag from Jobo.
The expert drum is for prints. As is the 2500 series drum. Both are in very good condition.
Unfortunately, the processor won't be cheap to ship. It will ship from Oak Harbor, WA 98277. The box's dimensions are 48" long x 24" high x 22" wide. The weight is about 40lbs. With that information, you can check on the shipping costs. I'm willing to send it anywhere in the world, but if you are outside the US, you take the risks. If you are in (or coming to visit) Washington state, I'm willing to meet you within a reasonable distance from northern Whidbey Island.
I'm asking $850 plus shipping. I'll cover the PayPal fees. If you are interested, PM me. Feel free to make a reasonable offer. I'd rather see this go to a good home here than have to deal with that auction site
Thanks for looking!
