JOBO CPA 2 No Instructions

[BarrieB]

Greetings; I am new to rotary processing , It appears that the Jobo CPA 2 can be used for both Prints and Films; I do not have an
Instruction book , where could I locate the information I may need to operate this machine? I intend to try Sheet Film ( 4 x 5 ) first. I assume F on the motor button will give me the correct speed of rotation,
Cheers Barrie B. Australia.

 

[lee]

http://www.jobo-usa.com has manuals on the site I believe if not pretty good info

lee\c

 

[lee]

barrie,

look under "support" in the analog section and choose the manual option

lee\c

 

[hka]

Manualllll....

Greetings; I am new to rotary processing , It appears that the Jobo CPA 2 can be used for both Prints and Films; I do not have an
Instruction book , where could I locate the information I may need to operate this machine? I intend to try Sheet Film ( 4 x 5 ) first. I assume F on the motor button will give me the correct speed of rotation,
Cheers Barrie B. Australia.

Here it is.
Don't expect to much from it.

 

[Bob F.]

Here it is.
Don't expect to much from it.

There is a much larger manual on the site Lee referenced - nearly 100 pages worth.

Bob.

 

[chuck94022]

Yes, the site has plenty of information. And the first thing you will learn is that "F" is not the speed you want...

-chuck

 

[BarrieB]

Missing Instructions, Jobo CPA 2 .

barrie,look under "support" in the analog section and choose the manual option lee\c

******* Thanks every-one, I now have ALL the much needed instructions, great. I have the unit set-up and expect to give it a ' trial run ' soon. Gee APUG is a great ' Community ', I hope I can be of help to someone one day. Cheers Barrie B.

 

[CHHAHH]

Hey good people!
I would like to re-open this topic.

I good a Jobo CPA with a lift for a bargain. But no instructions than the 1 sheet of paper included. Overall i think i know what to do with it but i still have no idea how much water i should put into it and what rotation speed and mode i should use.. I was hoping that somebody here could help me with that

Thanks a lot!

 

[wildbill]

Hey good people!
I would like to re-open this topic.

I good a Jobo CPA with a lift for a bargain. But no instructions than the 1 sheet of paper included. Overall i think i know what to do with it but i still have no idea how much water i should put into it and what rotation speed and mode i should use.. I was hoping that somebody here could help me with that

Thanks a lot!

So, you don't want to read the instructions provided by lee in this thread?
this is on the very first page-Tempering bath capacity: 4.75 gallons (18 liters)
page 8 gives recommended rotation speeds

 

[CHHAHH]

I couldn't open the link...
But thanks for your answer!!!

 

[ic-racer]

Here is a more direct link:
http://www.jobo-usa.com/images/manuals/CPA2_CPP2_manual.pdf