- Joined
- Oct 26, 2009
- Messages
- 1
- Format
- 35mm RF
My Jobo ATL 1000 is working well on the E6 process.
However with C41 process, there is no rinse between the bleach and fix but after the fix process the rinse process was operated normally.
Should it be the problem with the programming in the EPROM of this machine? Any suggestion?
Cheers,
Ben
However with C41 process, there is no rinse between the bleach and fix but after the fix process the rinse process was operated normally.
Should it be the problem with the programming in the EPROM of this machine? Any suggestion?
Cheers,
Ben
