How to disassemble Sekonic Digilite F

lesspaul

Member
Joined
Nov 19, 2013
Messages
2
Format
35mm
I've got a Sekonic Digilite F that is not powering up correctly, and I want to take a peek to see if I can find the problem. Is there anything other than removing the two screws in the battery compartment that I should do before trying to separate the two clamshell halves?

Much thanks.. Paul
 

rjbuzzclick

Member
Joined
Jan 30, 2010
Messages
379
Location
Minneapolis
Format
Multi Format
Funny, mine just quit working a few weeks ago too, they must be in kahoots! Mine doesn't power up at all. It's getting power at the board and that's as far as I've had time to go. To take it apart, there are two screws in the battery compartment, and one more under the little blue label on the back. You don't need to remove the larger black label on the back. With those three screws out the main case should come apart. There are more screws and stand-offs inside on the circuit boards.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,973
Location
U.K.
Format
35mm
Very carefully.
 
Last edited by a moderator:
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…