Hello,
Recently, I have developed a few rolls of Tri-x (35mm) that contain one or two frames with very faint scratches. They seem to be visible only in lighter areas of the shot upon enlargement. Also, they always run horizontally across the frame, as if one is holding the camera in standard orientation. I have cleaned the inside of my camera (pressure plate, etc.) and I store the negs in Print File sleeves. I usually let the negatives dry overnight, but I am starting to wonder if the emulsion is slightly damp when I insert the negs in the sleeves. Even still, I am very gentle in handling them. I'm also puzzled by the fact that it doesn't happen on every roll and on the rolls that do have scratches, it is only on one or two frames. The only other oddity is that I never had this experience until I started using HC-110. I don't see how this would make any difference though. I also use a hardening fixer, so I would imagine the emulsion should be fine as long as it is dry. Any ideas or advice? Thanks.
Jmal
Recently, I have developed a few rolls of Tri-x (35mm) that contain one or two frames with very faint scratches. They seem to be visible only in lighter areas of the shot upon enlargement. Also, they always run horizontally across the frame, as if one is holding the camera in standard orientation. I have cleaned the inside of my camera (pressure plate, etc.) and I store the negs in Print File sleeves. I usually let the negatives dry overnight, but I am starting to wonder if the emulsion is slightly damp when I insert the negs in the sleeves. Even still, I am very gentle in handling them. I'm also puzzled by the fact that it doesn't happen on every roll and on the rolls that do have scratches, it is only on one or two frames. The only other oddity is that I never had this experience until I started using HC-110. I don't see how this would make any difference though. I also use a hardening fixer, so I would imagine the emulsion should be fine as long as it is dry. Any ideas or advice? Thanks.
Jmal