drkhalsa
Subscriber
I would prefer the 12mm like other Nikon CW system. Come to think of it you can set the spot to be the entire frame thus making it a true averaging metering system.
Would that be better for B&W?
I would prefer the 12mm like other Nikon CW system. Come to think of it you can set the spot to be the entire frame thus making it a true averaging metering system.
Want your F5 to be lighter? Shoot with lithium AA's. Yeah, they aren't cheap, but they definitely make the camera lighter.
They last significantly longer too - even if you don't use the camera often. (They self-discharge more slowly than alkalines, and have a higher capacity to begin with too.)
I agree with Chan Tran. With B&W and color negative film just use center weighted metering instead of matrix and you're always spot on. The same trick works for F100 as well.
I use high capacity rechargeable batteries. With my use, they last weeks (certainly longer than the rechargeable batteries in my digicam). The weight doesn't bother me.
Regarding the focus area visibility, I find it to be a feature. I don't want those targets to be too apparent when I'm composing anyway. I generally set autofocus on the AF-ON button, and use the center target then shift the frame to the composition I want.
Chan Tran - blank sky - too funny!![]()
Yeah, best thing to do, unless you're using the MN-30 NiMH pack, is to use the Energizer Ultimate Lithiums. No, not cheap, but they do last a long time, and the camera is a little lighter, as mentioned in my previous post.
-J
I've had a totally different experience with Sanyo NiHMs, I use several sets for my F5, and they have held charge for months. During even a 8-12 hour CS session (constantly focusing), I tend to get a good six hours on a set running AF-s lenses. If I could get reliable MN-30s, I'd use those, but there aren't any new ones.
Honestly, I don't pay attention; I always leave everything on the top display set to the same thing so I never look at it- I put new batteries in, and I shoot until AF stops working. When I look then, it's at the totally empty reading. At a recent shoot, I noticed it reading at half full, but I didn't have any problems using AF-c/matrix for a couple hours.I'm sure the batteries last a while, but how does the battery level meter respond? Does it show like it's half full soon after starting to use them?
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY: ![]() |