Hello Simon Galley, flat FB?

eclarke · May 21, 2007

Perhaps Simon could update us on the new flat FB paper and a projected launch date..Thanks..Evan Clarke

Kobin · May 21, 2007

I am also very interested to hear.

K.

Petzi · May 21, 2007

AFAIK they made a change to their production and that's it. Whether your paper is affected depends on when it was produced.

Thomas Bertilsson · May 22, 2007

(there was a url link here which no longer exists)

Has a lot of answers.

eclarke · May 22, 2007

I have read this thread when it was current. I have new paper and see no difference in curling. The original thread made it sound as if the FB would be akin to RC for flatness..Just curious to have Simon's update.

jmdavis · May 22, 2007

I have noticed that the new paper I have curls much less than the old. Looking at the two contacts that I made on Gallerie last night there is hardly any curl after drying face down on screens. They do require a little flattening. But compared to the past, they are flat already.

Mike

jstraw · May 22, 2007

Don't you think when this new paper hits the market there will be no need to speculate? I'm pretty sure there will be clarity in the form of a marketing push.

eclarke · May 22, 2007

I should have just p.m.ed him, I mistakenly thought somebody else would be interested. If the new paper is imminent, I might not want to put any of the old stuff in the freezer..EC

jstraw · May 22, 2007

eclarke said:
I mistakenly thought somebody else would be interested.

Wait...wait...I'm still tuning my violin... :rolleyes:

Thomas Bertilsson · May 22, 2007

To me it appears as if it already happened. But then again, I never really had any problems with Ilford curling before the change either. I bought a couple of boxes from the local camera store, and there were two different packages. One that just looked older (different label) and one that looked brand spankin' new. Guess which I picked. In 8x10 it appears as if the print dries flatter (emulsion side down on screens).

- Thomas

eclarke · May 22, 2007

I Just used two new boxes of 11x14 Warmtone with new labels and can really see no difference..Oh well no steps backward!!..EC

pentaxuser · May 22, 2007

I would be surprised as one responder has said if Ilford has changed FB to the new flat version and said nothing about it.

As a RC user, I have tried to keep tabs on this thread and cannot recall seeing anything about a launch.

So, if I am right the good news is that if some of us have seen no change, it's because there has been no change and NOT that the new labels is the new stuff that has failed. The bad news is that we don't have a timescale for the change.

It may be still "work in progress" and if Ilford have said nothing, it's because there is nothing new to report.

pentaxuser

Simon R Galley · May 23, 2007

Dear All,

Sorry for the delay in replying, day job got in the way !!!

The new stay flat technology has not been applied to any production batches as yet, technically we have some issues to address, as well as
ensuring the new coatings have exactly the same properties and longevity.
I can assure you it is coming and I will most certainly let you know when
we intend to launch, we will obviously have a 'marketing' announcement as well.

Regards

Simon ILFORD photo / HARMAN technology Limited :

eclarke · May 23, 2007

Thank You Simon, That is the answer I am after. I am going to fill the freezer with paper when the new stuff is launched and do a fifo system, freeze a new box. I'm paranoid about the supply...Evan Clarke

ooze · May 23, 2007

I'm also one of those eagerly looking forward to flat fiber paper. All my big and heavy photo books are filled with FB prints for flattening.

Cheers,
omar

MurrayMinchin · May 23, 2007

Thanks for stopping by with the up-date Simon

Murray

Jim Fitzgerald · May 23, 2007

I just noticed some prints that I did on the Fotokemika FB that dried flatter than anything I've done in the past. 8x10's only, but I have some 11x14 to test. Both the papers seemed to dry rather flat. I'm not trying to take away from Ilford's great paper but just thought everyone should know.

Jim

pentaxuser · May 23, 2007

Simon. That's great. Oh and as a little addition can you ensure that it can be archivally washed in about 1-2 mins max. Shouldn't be that difficult surely?

Only kidding! Just a little levity to counterbalance some of the earnestness I've seen.

pentaxuser

eclarke · May 23, 2007

Yes, and 16x20 should be about $.40 US per sheet!!...EC

Simon R Galley · May 25, 2007

Dear Pentax and eclarke,

Where I come from we have an expression....'shy lads get nowt'....

Or in this case ...you did...

With Kind Regards

Simon. ILFORD photo / HARMAN technology Limited :

pentaxuser · May 25, 2007

Simon R Galley said:
Dear Pentax and eclarke,

Where I come from we have an expression....'shy lads get nowt'....

Or in this case ...you did...

With Kind Regards

Simon. ILFORD photo / HARMAN technology Limited :

I like it! Reminds me of the last Ilford tour. For this year's lot there's probably more of that on the forthcoming tour - no charge either. Laughter is light safe and permitted in any part of the complex.

pentaxuser

Hello Simon Galley, flat FB?

Membership Council

Privacy & Transparency

Privacy & Transparency