Anyone know what all the buttons do? Sounds silly I know, but I got this off of KEH and it was a steal - problem is no manual! Does it only read in EVs?
Art.
Art.
Hasselblad PME45 question
-
A
- Thread starter gr82bart
- Start date
Recent Classifieds
-
For Sale Three TLRs--Two Minoltas & One Old Standard
- Started by wjlapier
-
For Sale 100ft bulk roll of Neopan Acros 100
- Started by Gram Nylén
-
For Sale 100' Fresh Kodak 5222 BWXX Film
- Started by RoboRepublic
-
For Sale PENTAX-F SMC 17-28mm Fish-Eye
- Started by Acere
Forum statistics
ISO button changes the ISO by using the two arrow up and down PR buttons.
F-Max is the maximum aperture you got on the lens you are using
Metering button toggles from Spot [little dot], Integral [square] and Incident light metering [sun with rays]
The red button switches it on.
The most important thing is to make sure your focusing screen matches your finder. The recommended screen for the current PME45s is the Acute Matte D Series screen, but if you use an older screen you can set the finder to compensate. You need to enter programming mode to do this, by pressing the two PR buttons simultaneously.
You could pick up a manual easily, go get one!
F-Max is the maximum aperture you got on the lens you are using
Metering button toggles from Spot [little dot], Integral [square] and Incident light metering [sun with rays]
The red button switches it on.
The most important thing is to make sure your focusing screen matches your finder. The recommended screen for the current PME45s is the Acute Matte D Series screen, but if you use an older screen you can set the finder to compensate. You need to enter programming mode to do this, by pressing the two PR buttons simultaneously.
You could pick up a manual easily, go get one!
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |