Hasselblad left hand bracket for SWC/M

blee1996

Subscriber
Joined
Jul 25, 2008
Messages
1,236
Location
SF Bay Area, California
Format
Multi Format

Thanks for the information. It is a nice minimalist design with L-bracket to enable both common left-hand grips, and Arca Swiss compatible QR plate. I will see if I can DIY something myself.
 
OP
OP

Pasto

Subscriber
Joined
Dec 15, 2004
Messages
864
Location
Montreal
Format
Multi Format
This does look very nice. However, from the pictures, it does not look like the darkslide can be fully removed from the SWC with the handle in place. Can you confirm?
 

eli griggs

Member
Joined
Nov 15, 2005
Messages
3,856
Location
NC
Format
Multi Format

Just buy a pair of "pro" quality coil style sync cables, a flash cable hub allowing at least a three way sync, two strobes/flashes with a main, short cable, that does not foul the camera or kit when in use, or on the move, camera in hand, and always have an eye out for nesting books for the flashes, out of the image area, but providing enough of the correct coverage.

Lightweight stands with ball head type rotation of the flash direction also works.

Or, at last, too late for bed, borrow or sire two or three TALL teens to point those strobes wherever you want them to!
 
OP
OP

Pasto

Subscriber
Joined
Dec 15, 2004
Messages
864
Location
Montreal
Format
Multi Format
I finally settled on a grip/flash bracket for the SWC that suits my needs. I thought I'd share so others may have a starting point if they encounter a similar issue. I decided to use the Hasselblad Flash Gun Bracket Left Grip 45020 for several reasons. 1) it's light and compact, 2) it has a flash cold shoe, 3) is has a cable release built-in, and 4) it's relatively inexpensive. The problems were that the camera attachment point is designed for the older style Hasselblad camera plate, and the positioning of the SWC on the plate (even if it did fit) would make it impossible to remove the dark slide. The solution was rather simple. I had a small aluminum adapter made that fit into the grip's existing mount and that could accommodate (on the top) the Hasselblad Tripod Quick Coupling (45129) Release Plate. This way the SWC could be mounted and unmounted rather easily. The body now sits further back to accommodated the dark slide and slightly closer to the left hand grip. This makes for a compact SWC and grip, that allows a flash to be easily mounted, or a remote trigger in my case. This is what is all looks like. The extra bit on the cold shoe is because the trigger does not fit the Hasselblad shoe. There is still plenty of room for the neck strap as well. I hope this is helpful to some...
 

Attachments

  • IMG_5555.jpg
    783.5 KB · Views: 106
  • IMG_5563.jpg
    875.4 KB · Views: 101
  • IMG_5562.jpg
    828.7 KB · Views: 83
  • IMG_5561.jpg
    865.7 KB · Views: 92
  • IMG_5560.jpg
    931.8 KB · Views: 89
  • IMG_5559.jpg
    953.1 KB · Views: 75
  • IMG_5558.jpg
    724.8 KB · Views: 87
  • IMG_5556.jpg
    791.4 KB · Views: 102

Trask

Subscriber
Joined
Oct 23, 2005
Messages
1,930
Location
Virginia (northern)
Format
35mm RF

I've quite enjoyed this thread because I too have tried to use my SWC with a hand grip, so your experience is edifying. One question regarding the mounting plate you had made: what is preventing the entire mass of the camera from "unscrewing" itself off the hold-down screw that comes up to the mounting plate from the grip handle? That was one problem I encountered -- that the shear bulk of the camera + lens could cause it to begin to loosen the friction-based connection between the grip and the body.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
Well done with a clean & elegant design.
 
OP
OP

Pasto

Subscriber
Joined
Dec 15, 2004
Messages
864
Location
Montreal
Format
Multi Format
Not sure that I can answer that question yet Trask. For now it feels very secure. Indeed, that grip is designed to hold a larger and heavier 500 series body with lens. I'll know for sure after walking around with it for a while.

Thanks Sirius Glass...
 

eli griggs

Member
Joined
Nov 15, 2005
Messages
3,856
Location
NC
Format
Multi Format

Perhaps some Loctite Red 271 or high temperature 272?.

I'll also mention, for the benefit of non gun owners, that the pistol grip of the Hasselblad flash, and shutter release is very, very like many Match pistol grips, including Olympic and large, International Competitions.

It would not be much beyond the carving skills of a good gunsmith of custom pistol grips, to make beautiful 'Hasselblad' pistol grips in Left or Right hand versions, with you of your camera service attaching a hot shoe, mounting stage and shutter release, perhaps out of beautiful burl or splatted Maple, Mahogany, Ebony, Teak or White Oak.

If you want a similar set-up as the OP has created with his grip, but in wood take a little DuckDuckGo search for images of pistol grips.

Cheers
 

DKimg

Member
Joined
Nov 24, 2013
Messages
21
Location
South Florida
Format
4x5 Format
翊梵墨 said:
Click to expand...

I'm looking to get a minimalistic L-Bracket for the SWCM and these photos looks very interesting and perfect for the travel scenarios, but it's really advertising for 903/905 series. I wonder if it would be okay for the SWCM?

It's expensive from the one source I've seen it online...
 
OP
OP

Pasto

Subscriber
Joined
Dec 15, 2004
Messages
864
Location
Montreal
Format
Multi Format
Hi DKing, I would like to try that set up as well but I can't find where to purchase it. Any ideas? Also, I asked the original poster of that grip/handle if the darkslide could be removed with the grip in place but never received a reply....
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format

I never had a problem with Hasselblad or non Hasselblad left hand brackets on muy Hasselblad 903 SWC. I would still want to try on any candidate before buying though.
 

DKimg

Member
Joined
Nov 24, 2013
Messages
21
Location
South Florida
Format
4x5 Format
Soo... I decided to go ahead and purchase the L-Bracket from AliExpress, spending a whooping $170 for a bracket. After some pressure on the seller for deliver updates and tracking (typically you get notified from the seller within 24-48hrs of purchase), it arrived in less than two weeks. I’ve taken a few initial photos to share.

First impressions: It’s solidly built and aligns perfectly with the SWCM. The left-side socket for the lanyard is very snug, making it a bit frustrating to adjust from its natural position to an upward one—likely due to the plate’s thickness at the bottom. May need to replace the bottom base plate or come up with something more creative. I’ll share better images later, but for what it’s worth, its low profile and convenience are just what I was looking for. It allows me to add a small flash and potentially a 3D-printed attachment for a digital measuring meter.

 
Last edited:
OP
OP

Pasto

Subscriber
Joined
Dec 15, 2004
Messages
864
Location
Montreal
Format
Multi Format
Thanks for this. It certainly fits very close to the body. Wondering if the left side neck-strap could be fixed to the l-plate directly. It also looks like the dark slide is free, but with the possible interference of the neck-strap.
 

DKimg

Member
Joined
Nov 24, 2013
Messages
21
Location
South Florida
Format
4x5 Format
Pasto said:
Thanks for this. It certainly fits very close to the body. Wondering if the left side neck-strap could be fixed to the l-plate directly. It also looks like the dark slide is free, but with the possible interference of the neck-strap.
Click to expand...

Exactly! That's the dilemma for now but again this was 5 minutes slapping it together. But had the exact same thoughts
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…