For Sale Grip for Mamiya TLR, 645, RB / RZ cameras

[binglebugbob]

1.) Original Mamiya flash bracket, trigger release grip thingy with accessory ("flash") shoe (many of these are missing the flash shoe) for Mamiya C330, 220, 645, 645-1000S, and RB67 .. $25 shipped within the USA. (SOLD)


2.) Lindahl articulated flash bracket for the above cameras. A little scuffy, but a shot of black Krylon would do wonders. Good working condition. Also has built in trigger release to couple to these cameras, and raises the flash above the camera to reduce red eye. $35 shipped within the USA.

 

[CMoore]

I will take #1

 

[MattKing]

Just a caution.
Grip #1 will work flawlessly with a C330 and an RB67 - that is what it was designed for.
The shutter release trigger spacing may not work with all Mamiya 645s.

 

[CMoore]

Thanks for the tip.....i have an RB

 

[binglebugbob]

It fits both of my 645-1000S bodies perfectly. And it (the "DeLuxe L grip") is listed on page 74 of the Mamiya 645 instruction manual as an original accessory for the Mamiya 645. If there are 645s that it doesn't fit, then it must have been some of the very late ones.

 

[MattKing]

It doesn't work with the 645 Super, 645 Pro or 645 Pro Tl unless the length of the "plunger" on the grip is modified - the location is right but the spacing is not.
Based on your photo, the grip that you have listed for sale is the C330/RB67 grip and is actually a different grip than the Deluxe L grip listed in the manual. The cold shoe wasn't an accessory for the one you have listed, it is included with that version of C330/RB67 grip.
It's interesting that your grip works with a 1000s - I never had the opportunity to try it on that camera.
I used to have one of the Pistol Grips that are of the same vintage and are listed along with the Deluxe L grip in that manual. It came with a batch of Mamiya stuff I bought off of eBay. It didn't work with either my C330, my 645 Super or my 645 Pro, all because of the position of the lever that is supposed to engage the shutter release.

 

[binglebugbob]

The only difference I see in the grip in the manual from this one is that the accessory shoe is fixed to this one. Most of those where it screwed on as an accessory have gone missing. Other than that it appears to be the same grip. The 645 Pro takes the GL400 grip, which this isn't. But thank you for your info.