indy_kid
Allowing Ads
Graflex Series B Camera Outfit
Includes the following:
The camera is in good overall condition for its age. Spring tension is reasonable, but will lag at the slowest speeds (very common for these models). "Bag Mag" works as designed. Lens glass is clean and clear; no haze or fungus. It does NOT have the rotating back like other, similar Graflex designs. I suspect those came after this model was released.
The last photo shows the top of the camera. The two small leather straps that originally held the handle in place were broken, so I used my Dremel tool to cut the tops off the rivets. I've left those brass rivets in place. The handle is included, so you can use replacement leather or metal straps to re-attach it.
Asking $150 + S/H.
Includes the following:
- Graflex Series B 3-1/4" x 4-1/4" Cut Film Camera
- Cut Film Bag Magazine with twelve (12) septums
- Graflex Film Pack Adapter
- Lens Hood
- Other Assorted Accessories
- Two (2) partial packs of film - certainly expired, and may have been exposed, but you can use them to practice loading the septums
- Wooden Carry Case with Handle
The camera is in good overall condition for its age. Spring tension is reasonable, but will lag at the slowest speeds (very common for these models). "Bag Mag" works as designed. Lens glass is clean and clear; no haze or fungus. It does NOT have the rotating back like other, similar Graflex designs. I suspect those came after this model was released.
The last photo shows the top of the camera. The two small leather straps that originally held the handle in place were broken, so I used my Dremel tool to cut the tops off the rivets. I've left those brass rivets in place. The handle is included, so you can use replacement leather or metal straps to re-attach it.
Asking $150 + S/H.
Attachments
Last edited:
