• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Gitzo G2272M head?

St Ives - UK

A
St Ives - UK

  • 4
  • 1
  • 87
Across the Liffey

H
Across the Liffey

  • Tel
  • Feb 25, 2026
  • 1
  • 2
  • 65

Recent Classifieds

Forum statistics

Threads
202,444
Messages
2,840,936
Members
101,333
Latest member
shanhw1978
Recent bookmarks
10

MurrayMinchin

Membership Council
Subscriber
Allowing Ads
Joined
Jan 9, 2005
Messages
5,649
Location
North Coast BC Canada
Format
Hybrid
Has anybody used a Gitzo G2272M head with 4x5 or bigger cameras? From the pictures I've seen of it there appears to be some sort of leaver for the quick release on the left side of the head that looks like it might get in the way of the cameras base. Gitzo has it in their suggested heads section for LF cameras, but I just want to be sure.

http://www.gitzo.com/Jahia/site/git...ollectionRequest=productDetail&detailPid=5268

Murray
 
Murray, I've used this head for a couple of years, for 4x5 and smaller. My 4x5 is a Horseman FA metal field cam and a Calumet-copy Tachihara woodfield, and it works fine with both of them. I have 4x5 monorail, but no way I would put on this head, it goes on the bogen 3047. The lever on the left side tightens the QR plate down snug, it operates on a "half turn", hard to explain, but it does not get in the way of the camera. My only disappointment has been I recently purchased a Gitzo 3530s pod, which is a series 3, and the 2272m head (which is a series 2, smaller diameter base than the systematic plate) will not do 100% vertical without rotating the QR plate on the cam 90 degrees. However, this is not an issue with 4x5, and goes away when I put on the 1321 leveling base. I wish gitzo made a PT head for series 3, I've seen some on ebay, but they look like soemthing out of star wars. good luck, Tom Seattle
 
Thanks a bunch Tom :smile: :smile:

Murray
 
Here's another quick question if you don't mind, Tom - have you ever had it in sub freezing weather and did the 'fluid' in the head get thick, making it hard to move?

Murray
 
Here's another quick question if you don't mind, Tom - have you ever had it in sub freezing weather and did the 'fluid' in the head get thick, making it hard to move?

Murray


No, not below freezing, here in Seattle winters average 40-something weenie-shrinking degrees...("LA Story" - steve martin). Better off finding someone in Fairbanks or Finland! Even if I am in Cascades lately, it's above freezing, and roads are clear. It's a nice head, a lot smoother than the 3047 for sure. Gitzo catalog refers to "fluid cartridges" but no further specs.
 
Thanks again, Tom!

Sorry (never saw the movie) but I'm quite familiar with the effect during deeper stream crossings...brrrrrrrrr :wink:

Murray
 
I use the G2270M - the large base plate without the quick release. My 4kg field camera is supported wonderfully.
I've used it at -7 degrees celsius, with no ill effect, just shame that the copal shutter decided it was too cold:sad:
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom