Gauging interest: New 122 Film (HP5+)

[Thesnowman21]

I'm considering a somewhat insane project, and I'm looking to gauge interest. I'm researching buying an 8" x 100ft roll of HP5 in Ilford's ULF program, and cutting it down into fresh 122 film, rolling it onto 3d printed spools with homemade backing paper, and selling most of the rolls in a limited run (likely on Ebay). I'm still in the very early stages of planning this, but I'm estimating based on rough material cost that the price would be $20-25 per 6 exposure roll, which I know is a lot, but it would be fresh HP5, not 50+ years expired, 400 iso, and the film would be big enough to take advantage of the size of these cameras. I would hope to get the rolls out in December.

Let me know if you would be interested in something like that. Again, I'm very early in the process, so no guarantee it'll happen, but the large roll of film would be quite expensive on my end, so I want to know I wouldn't just be eating that cost. Also, if anyone has any ideas or advice, it'd probably be good to hear that too.

I'm not super familiar with the rules of Photrio, so I just want to be clear that I am not selling or advertising any product in this post, nor am I asking for crowdfunding. That being said, I have no intention to break the rules and apologize if this post is a violation of them. Like I said, I'm new to Photrio.

Thank You

 

[koraks]

I'm not super familiar with the rules of Photrio, so I just want to be clear that I am not selling or advertising any product in this post, nor am I asking for crowdfunding. That being said, I have no intention to break the rules and apologize if this post is a violation of them.

We have reviewed your post and decided it can be published in its present place. Thank you for your patience while your thread was under review, and good luck with your endeavor!

 

[BrianShaw]

I'm interested; if not very interested. Looking forward to hearing about feasibility and the other important details, like cost. But I'm interested. Have you considered FP4+? For me the slower film is more usable than HP5+

 

[blee1996]

I might also be interested in FP4+ in 122 roll. Right now I have the last few rolls of Verichrome Pan in 122 size, for Kodak 3A Autographic and an Al-Vista 3B panorama camera. It would be nice to have some fresh film.

 

[Wolfram Malukker]

The only issues here not addressed is getting spools. 3D printing is fine, but the thin flanges need to be checked for light-tightness. Many of the thinner spool flanges are not light tight when 3D printed. Backing paper and film is not difficult to get, it just requires someone to put in the effort as you describe.

Would 400ISO film be appropriate for the limited shutter speeds of most 122 cameras? Would 100ISO not be more appropriate?

 

[Thesnowman21]

I have some test spools I made that appear to be light tight, although I am planning on painting the flanges anyway.

As for film choice, I was looking at HP5 because I thought it was the only ULF film wide enough to support 122, but now that I'm looking at the list again there is FP4 in the 10" x 100ft. size, which would work, so I'll be shifting my focus to that.

In the meantime, I'll be buying some expired military film (that is much cheaper) to test my process before I invest in the ULF roll. From what I've read, that stuff is about iso 6. If I'm successful, I'll hopefully have rolls of that available by July. This film stock being cheaper would mean that the $20-25 that I estimated for a 122 roll of hp5 would go way down for this, maybe more like $10-15 (rough estimate) for 6 exposures.

 

[Steve Goldstein]

Not owning a camera that requires 122 film I have no horse in the race, but I just wanted to remind you that both Kodak and Ilford have had troubles with transfer from the backing paper onto the film in the past. Making suitable backing paper in this size may prove to be a formidable challenge.

 

[Trask]

I too have a Kodak 3A (model C) so perhaps would want a couple of rolls -- thank goodness I have a take-up spool. I would, however, have to figure out how to develop the film -- maybe in my JOBO tank?