Everything works great on the camera. It's honestly the cleanest 8x10 set up that I have come across. It's a very sturdy camera with all the movements you could ask for. It's one of the things I love about this camera...plus if you ever need any accessories or parts there are a ton of Cambo/Calumet parts for cheap.
Pros:
- A real simple 8x10 camera to use and learn on
- Interchangeable parts with other SC cameras of any format (knobs, lens boards, standards, rails, bases etc)
- Cambo SC lens boards are easy to find and very cheap
- Can handle pretty much any 8x10 lens without running out of bellows
- Bellows do not sag (actually look pretty new)
- Wide angle lenses like a 210mm work just fine (The widest I've used is a 210mm but you might be able to get away with wider...can't be sure though since I dont have any other wide angles to test)
- Monorail offers plenty of movements on each standard along with zero position detents
- All knobs and movements work as they should
- 8x10 bailer level for back works perfectly and spring lock holds film holders in tight
- Rail clamp is threaded for 3/8th but will include a 1/4th to 3/8th reducing bushing
Cons:
- Bellows racked out to max there are a few slight pinholes if you put a flashlight directly behind bellows (honestly not really a con because it's never affected any of my images just thought I'd mention it. It would be an easy fix for the buyer but I honestly see no need)
- Only has one bubble level and it's on the rear standard
- A real simple 8x10 camera to use and learn on
- Interchangeable parts with other SC cameras of any format (knobs, lens boards, standards, rails, bases etc)
- Cambo SC lens boards are easy to find and very cheap
- Can handle pretty much any 8x10 lens without running out of bellows
- Bellows do not sag (actually look pretty new)
- Wide angle lenses like a 210mm work just fine (The widest I've used is a 210mm but you might be able to get away with wider...can't be sure though since I dont have any other wide angles to test)
- Monorail offers plenty of movements on each standard along with zero position detents
- All knobs and movements work as they should
- 8x10 bailer level for back works perfectly and spring lock holds film holders in tight
- Rail clamp is threaded for 3/8th but will include a 1/4th to 3/8th reducing bushing
Cons:
- Bellows racked out to max there are a few slight pinholes if you put a flashlight directly behind bellows (honestly not really a con because it's never affected any of my images just thought I'd mention it. It would be an easy fix for the buyer but I honestly see no need)
- Only has one bubble level and it's on the rear standard
FS/FT: $500 + shipping or local trade (LA/OC area) for Mamiya RZ67 set up (will entertain other offers)
