- Joined
- Jun 20, 2008
- Messages
- 235
- Format
- Multi Format
Rittreck 5x7 with 4x5 back
$525 or best reasonable offer, plus shipping
This is a Japanese made 5x7 camera body with the original 4x5 back. It's the Rittreck view, made after Rittreck was bought by Wista.
All metal construction, it's built like a tank. It's in used but not abused condition. When I got it, it was pretty filthy from how it had been stored, but it cleaned up well, and the bellows is in good usable condition with no patch-ups. There was some flocking -- light-trap material -- that had turned to goo, and I replaced that, and the whole system is light-tight.
I prefer this camera over the Linhof, because it's just as sturdy and the movements are easier to use.
It has front swings and tilts, and rear swings and tilts and rear shift. I've done my best to illustrate the movements in the photos.
The back is a spring back, with the ability to lift the levers to remove the ground glass panel. It revolves 360 degrees.
I believe this is the original bellows. I decided not to replace the bellows because I believe they have some life left in them. However, I can replace the bellows for an additional $150 (includes cost of bellows and installation). However, this will take a few days (removing old adhesive from the camera body can take awhile) and so delay shipping.
I believe I'm asking a fair price for the camera, but the words "or best reasonable offer" mean what they say!
The camera weighs 9 lbs 2 oz, so I expect shipping weight would be about 10-1/2 pounds, from Zip Code 90027.
Pictures:
$525 or best reasonable offer, plus shipping
This is a Japanese made 5x7 camera body with the original 4x5 back. It's the Rittreck view, made after Rittreck was bought by Wista.
All metal construction, it's built like a tank. It's in used but not abused condition. When I got it, it was pretty filthy from how it had been stored, but it cleaned up well, and the bellows is in good usable condition with no patch-ups. There was some flocking -- light-trap material -- that had turned to goo, and I replaced that, and the whole system is light-tight.
I prefer this camera over the Linhof, because it's just as sturdy and the movements are easier to use.
It has front swings and tilts, and rear swings and tilts and rear shift. I've done my best to illustrate the movements in the photos.
The back is a spring back, with the ability to lift the levers to remove the ground glass panel. It revolves 360 degrees.
I believe this is the original bellows. I decided not to replace the bellows because I believe they have some life left in them. However, I can replace the bellows for an additional $150 (includes cost of bellows and installation). However, this will take a few days (removing old adhesive from the camera body can take awhile) and so delay shipping.
I believe I'm asking a fair price for the camera, but the words "or best reasonable offer" mean what they say!
The camera weighs 9 lbs 2 oz, so I expect shipping weight would be about 10-1/2 pounds, from Zip Code 90027.
Pictures:
