• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

For Sale FS: Omega B and D series lens boards, plates, and turret

Trader history for bjsmith7474 (10)

bjsmith7474

Member
Allowing Ads
Joined
Jul 29, 2010
Messages
1,964
Location
Alexandria, VA
Format
35mm
Selling a bunch of Omega parts.

Tons of extras that I'm hoping will help someone else out.

As always; Paypal and Money Order preferred, and shipping is extra. Discounts offered on purchase of multiples.

If you have any questions, please ask.

The following website helps greatly if you're trying to figure out what mount fits what lens and what they look like.

http://www.khbphotografix.com/omega/LensMountD5.htm

Omega B22

32mm lens boards $4 ea

Omega D5 / D6

3 lens turret - # 404-867, no lens plates, with thumbscrews $14

421-105 lens mount - with thumbscrews $16
421-107 lens mount - with thumbscrews (3) $18 ea

extra lens mount spacers (from 421-107 mount, look like the plates, but with two screw holes on each end) $4 set of 2

421-056 39mm threaded lens plate (4) $15 ea
421-056 39mm threaded lens plate - a bit dirty $12
421-132 (aka 421-932) extended 39mm lens plate $10
421-111 lens plate - drilled for 39mm with recessed edge $10
421-109 formed 39mm lens plate ( 1 black, 2 silver ) $10 ea
421-108 flat 50mm lens plate (4) $5 ea
421-143 flat 25mm lens plate - older style pebbled finish (2) $5 ea
421-116 flat 39mm plate with Nikon 39mm extension tube - for 80mm Nikon enlarging lens $18

Omega baseboard bolt wrench in envelope - 7-16" hex - part # 9-116-0006 $5

39mm locking / retaining rings

plain (5) - $3 ea
3 hole countersunk - made in Japan (3) $8 ea
 
Going to send you a PM, I have a D5 and the lenses from my DII, I need to figure out what I need to make the D5 operable.
 
PM sent for two items
 
ok...been out of circulation a bit...but I'm back now...anyone need any of these?

I also have a few Carlwen carriers, if anyone likes those.
 
hello,

please bear with my lack of knowledge here.

will a D5/6 lens board fit a DV? i bought the DV about a year ago and recently got space for a darkroom.

i have a turret lens board that came with my DV bit it does not have the external plates to mount lenses.

i have an 80mm rodenstock, 100mm nikkor and hope to have a 135mm. not sure, but i think they are all 39mm thread.

what lens boards/flanges and screw/nuts & bolts do i need?

many thanks in advance.

smiling gecko, aka kenneth david, aka "hey you!!!"
 

I'm not the OP, but I might be able to help.

But I'm not familiar with an Omega enlarger referred to as a "DV" - can you clarify?
 
Ok….

Well, sounds like maybe you have a bit of a cobbled together D2V? That is…sounds like a D2 with a later model variable condenser head, perhaps?

In general..the D2 series wouldn't use the lens plates from a D5/D6/Prolab. However, to my knowledge, the only turret that was produced was for the Prolab/D5/D6 series heads. So, it's possible that you actually do need the plates to fit onto your turret.

Check out the following web page. It's a great reference for what lenses need what plates / mounts. If you see your turret there…you'll need the plates they're talking about, and it'll show you what specific plates you need for what specific lenses.

http://www.khbphotografix.com/omega/LensMountD5.htm

Does that help?
 
thank you for the insights...i do have an omega DV with a 404-867 turret - without the small knurled mounting knobs.

i figured out which plate(s) i need -d'oh!!!

now where to buy the six missing knurled knobs?

thanks again.
 
You must log in or register to reply here.
Menu
Log in
Register