Hi folks,
I have some misc. darkroom stuff to unload. Paypal OK
An Arkay mixing valve with thermometer. I assume it works but has not been tested. The name plate sticker is falling off and has lost it's stickiness. It basically a shower valve with a thermometer built in. $40 bucks shipped in US
Next is a hanging dust free drying bag thingy. Can't think of the proper name at the moment
$35 bucks obo shipped in US
Stainless roll film washer consolidated from previous add and put here. This is for stainless reels, not plastic reels. $35 bucks obo shipped in US
The hot plate magnetic stirrer looks to have had a hard life but works. The heat seems to stay on whenever it is plugged in, not full blast heat but it never cools to room temperature. A lot of rusty screws and corrosion but it serves it's purpose. There is no stir bar included. $40 obo shipped in US
The densitometer came from the same recent lot of stuff I received. It seems to work fine. The "read" buttons cap is gone but it still works fine. It has White, Red,Green,Blue on the knob and there are four other knobs that twist that does who know what (calibrate maybe) I did not twist them. There are also four little set screws that look to do something but I don't know what. The LED panel has a part or two that don't light but it is readable. It has numerous scratches cosmetically and looks well used but as far as I know it works. This is a heavy sucker so beware. No Guarantees on this one. $65 obo shipped in the US. This is the same one consolidated from an earlier FS add
If you have any questions, let me know.
erik
I have some misc. darkroom stuff to unload. Paypal OK
An Arkay mixing valve with thermometer. I assume it works but has not been tested. The name plate sticker is falling off and has lost it's stickiness. It basically a shower valve with a thermometer built in. $40 bucks shipped in US
Next is a hanging dust free drying bag thingy. Can't think of the proper name at the moment
$35 bucks obo shipped in USStainless roll film washer consolidated from previous add and put here. This is for stainless reels, not plastic reels. $35 bucks obo shipped in US
The hot plate magnetic stirrer looks to have had a hard life but works. The heat seems to stay on whenever it is plugged in, not full blast heat but it never cools to room temperature. A lot of rusty screws and corrosion but it serves it's purpose. There is no stir bar included. $40 obo shipped in US
The densitometer came from the same recent lot of stuff I received. It seems to work fine. The "read" buttons cap is gone but it still works fine. It has White, Red,Green,Blue on the knob and there are four other knobs that twist that does who know what (calibrate maybe) I did not twist them. There are also four little set screws that look to do something but I don't know what. The LED panel has a part or two that don't light but it is readable. It has numerous scratches cosmetically and looks well used but as far as I know it works. This is a heavy sucker so beware. No Guarantees on this one. $65 obo shipped in the US. This is the same one consolidated from an earlier FS add
If you have any questions, let me know.
erik
