First up are 5 Riteway 4x5 holders. Four have the metal bails and one is the newer version with plastic bails, lock buttons, and number wheels to number each negative. They are all in excellent condition, light tight and work as intended.
I'd like to get $45 for the lot plus shipping on these fine holders. Holders have been Sold
Next up is a nice RH8 6x9 Graflex Film back for 4x5 using 120 film. It is the newer model with the lever wind and works as it should I'd like to get $55 plus shipping for this very nice 120 back. The RH8 back is Sold
Next up is a very clean Ilex Calumet Caltar 10" (254mm) lens in a No. 3 Acme Synchro Shutter. It will work on 4x5, and 5x7.
The lens just misses the corners on 8x10 at infinity, but can be used in close ups on 8x10. It comes mounted on a Linhof style board with a flange so can be mounted on any other board easily. It has no filter threads so I CAREFULLY glued a 52-67 step-up ring to the front of lens so it can take 67mm filters. The shutter was CLA'd several years ago and is as accurate as any 50y/o Acme shutter I'd like to get $90 plus shipping for this ready to use lens. This lens is Sold
Next up is a Polaroid Tominon 105mm f:4.5 lens. This lens will cover 4x5 nicely, but don't expect a lot of movements. It will however cover 6x9 with quite a bit of movement. The lens is mounted in a Polaroid Copal 0 press shutter and will include a nice locking cable release and a B&W 40.5mm 021 (light yellow) filter. I'd like to get $60 plus shipping Lens is sold
I have four Linhof/Wista lens boards three #0 and one Nikon #2 and a Sinar 5 1/2x 5 1/2 board with a 2" hole
I'd like $10 for each of the #0 boards and $15 for the Nikon #2 board and $20 for the Sinar board. All Boards are Sold
I'd like to get $45 for the lot plus shipping on these fine holders. Holders have been Sold
Next up is a nice RH8 6x9 Graflex Film back for 4x5 using 120 film. It is the newer model with the lever wind and works as it should I'd like to get $55 plus shipping for this very nice 120 back. The RH8 back is Sold
Next up is a very clean Ilex Calumet Caltar 10" (254mm) lens in a No. 3 Acme Synchro Shutter. It will work on 4x5, and 5x7.
The lens just misses the corners on 8x10 at infinity, but can be used in close ups on 8x10. It comes mounted on a Linhof style board with a flange so can be mounted on any other board easily. It has no filter threads so I CAREFULLY glued a 52-67 step-up ring to the front of lens so it can take 67mm filters. The shutter was CLA'd several years ago and is as accurate as any 50y/o Acme shutter I'd like to get $90 plus shipping for this ready to use lens. This lens is Sold
Next up is a Polaroid Tominon 105mm f:4.5 lens. This lens will cover 4x5 nicely, but don't expect a lot of movements. It will however cover 6x9 with quite a bit of movement. The lens is mounted in a Polaroid Copal 0 press shutter and will include a nice locking cable release and a B&W 40.5mm 021 (light yellow) filter. I'd like to get $60 plus shipping Lens is sold
I have four Linhof/Wista lens boards three #0 and one Nikon #2 and a Sinar 5 1/2x 5 1/2 board with a 2" hole
I'd like $10 for each of the #0 boards and $15 for the Nikon #2 board and $20 for the Sinar board. All Boards are Sold
Last edited:
