rrankin
Allowing Ads
US shipping is $10, and that will cover one or as many as you want to buy from this group.
USPS money orders preferred, PayPal is ok, or checks from people I already know. Overseas shipping with payment by PayPal is fine. I can also take direct deposit in Australia.
All measurements are approximate. These might have cleaning wisps , and I'm too old to see them, but I don't think so unless I've mentioned it... But expect them. The image circle is generally going to be approximately the same as the focal length on these unless otherwise noted.
$$ to APUG if sold here.
8) Darlot, 6" focal length; hood dent (see photo), 4 1/4" tall; 2 1/4" at threads; rear glass 1 5/8" $235
9) Fallowfield Enlarging Petzval, 6" focal length; 3" tall; 3 1/2" diameter at flange; glass 1 5/8; flange is included. This is a very unusual enlarger petzval. This actual lens is pictured in the Lens Vade Mecum. $185
10) 5 1/2" focal length, so will vignette on 4x5 but might be fun for close ups, and will work for medium format. 3 1/2" tall; 2 1/2" at threads. About 1-2mm of front edge separation; $115
11) 7" focal length, 1 mm front edge separation; 3 1/2" tall, 2 1/4" diameter at the threads. The rear element has a light off center scratch, so I've priced this accordingly. However, I really don't think it will matter much in your photos. A little nose oil and it should be good to go. $85
12) 6" focal length, about 6 1/2" image circle, pinpoint chip off center on front element; 4 1/4" tall, 2 1/4" at threads $110
13) 6" focal length, 6 1/2" image circle; 4 1/4" tall; 2 1/8" at the threads; glass 1 3/4". The rear has a small dent, but the rear element still unscrews easily for cleaning. $115
14) 6" focal length; 3 1/2" tall; 2 1/8" at threads; glass 1 7/8, 1-2mm of front edge separation $95
15) 5 1/2" focal length; glass 1 1/2"; barrel is 1 3/4" in diameter, 2 1/2" tall. Will vignette on 4x5 but might be useful close up and on medium format. I also have a 5 1/2" listed in my 'oddball short petzvals' group; $65
16) 6" focal length; 3 1/2" tall; glass 1 7/8"; 2 1/4" at threads. The rear element has some edge chips from being forced in incorrectly and the front has one or two pinpoint chips off center; $85
17) 6" equiv focus is the engraving; 3" tall; glass 1 1/4"; barrel 1 3/4". There is an internal restrictor that you might want to knock out to speed this up if you are going to try for aberrations in your photos; $75
