For Sale FS: 16.5" Artar Filter Adapter

When you have a lathe, you tend to make things that make your life easier, like a solution to the fact that Artars weren't designed to leave the studio.

This is a brass adapter I made to allow filters, lens shades, and lens caps to be placed on a 16 1/2 inch Artar. Note that this is NOT a Red Dot Artar. I don't have one available right now, but my memory is that this adapter did fit the one I used to have.

Offered for sale is the adapter only. Pictured below is the adapter in use with a lens cap and lens shade.

If you decided you wanted one of these and went to a machinist to make one, you'd be quoted a price higher than the value of the lens. I have no idea how to price this, so I'll start off with one price, and start dropping it periodically until it sells. Grab it if you like, or msg me with an offer.

$60 + shipping (probably $1.30 with 1st Class Mail).......OBO

Charley

Some folks will look at their Artar and think that they don't have anywhere to attach this adapter. There's actually a small lens shade screwed onto the front of the Artar. It may take a lot of effort to unscrew it, but it does come off.

Charley

c.d.ewen said:

Some folks will look at their Artar and think that they don't have anywhere to attach this adapter. There's actually a small lens shade screwed onto the front of the Artar. It may take a lot of effort to unscrew it, but it does come off.

Charley

View attachment 222741 View attachment 222742

Click to expand...

What size filter? I have a 19 " Red dot Artar.

Duh...that would be a good thing to know. 67mm.

This adapter will not fit a 19" Artar.

Charley

Sale pending.

Charley

Sold.

Charley