• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Found: Working Epson V600 - how to check, calibrate, etc?

Viaduct.jpg

A
Viaduct.jpg

  • 2
  • 1
  • 25
Durham walk.jpg

A
Durham walk.jpg

  • 0
  • 0
  • 18

Recent Classifieds

Forum statistics

Threads
202,538
Messages
2,842,024
Members
101,368
Latest member
codytr4
Recent bookmarks
0

jay moussy

Member
Allowing Ads
Joined
Jun 10, 2019
Messages
1,315
Location
Eastern MA, USA
Format
Hybrid
Someone dropped a working epson V600 at the local dump reuse-and-recycle, so I took action..!

How to make sure optics are right on the mark, calibrate or such?
A quick Sunday-morning check on a so-so film strip of mine shows it works as intended, but I do not yet a true measure of true rendition.

I also do not have masks - I borrowed the 120 from my own V600.
I also wonder if I could go a bit crazy and try experimenting, on this "free" machine?
 
Do you have a resolution target of any kind and a IT.8 target?

If not, just do two scans with same settings on both scanners and compare results.

You could go crazy and... sell it. The other way would be to remove the glass plate for glass-free scanning, clean the mirrors if they are accessible without breaking the enclosure, remove protective glass on CCD sensor to cut down on flare, try to cover elements in the light path with antireflective material... Nothing will improve the results substantially but might still be fun and educational.
 
Last edited:
Kicking this thread again... I do not have masks, so what should I get:

- ebait'ng original (120) Epson masks?
- same but Asian knock offs?
- screw around with neg-on-glass, or wet scanning?
 
For some scanners, you need either the film holders or something that puts the necessary "window" in the location that the scanner and software use for calibration. Otherwise the results can be, at best, unpredictable.
 
For some scanners, you need either the film holders or something that puts the necessary "window" in the location that the scanner and software use for calibration. Otherwise the results can be, at best, unpredictable.

No, you don't. You just need to leave the calibration area uncovered.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom