Filter, Hood for Rollei 35 S

[Mustafa Umut Sarac]

I have an Rollei 35 S 40mm Sonnar f:2.8 Singapore . I am looking for color filters for BW and an lens hood . Is there such a thing ? Who sells them ? I want to know the prices and buy from APUG.

I think past summers heat effected camera positively , lower speeds started to work.

Thank you,

Umut

 

[Richard S. (rich815)]

I've gotten a yellow and orange for my Rollei 35 S and a small hard plastic screw-on hood but only after a lot of patience. I cannot even remember where I found them exactly. Intermittently on eBay, here, RFF, etc....

 

[Richard S. (rich815)]

I just looked at ebay and searched "rollei 35 S hood" and "rollei 35 S filter" and there's at least 4 auctions for hoods and 9 auctions for filters.

 

[Mustafa Umut Sarac]

Thank you Richard,

I liked one hood at ebay and it was 175 dollars, others were not sexy as it is. And I dont have pay pal so I cant use ebay.
I will ask APUG to buy one hood and red filter next month.

Umut

 

[ic-racer]

The filter and/or hood thread size you need is M30.5x0.5

http://www.bhphotovideo.com/c/product/94381-REG/B_W_65072014_30_5_mm_091_Dark.html

http://www.bhphotovideo.com/c/product/94459-REG/B_W_65069555_30_5mm_Screw_In_Folding_Rubber.html

 

[r-brian]

I still have a like new Bowers polarizer in 30.5mm that I had for my 35S (that I sold a couple of years ago). I rummaged through the drawers at my local old fashion camera store that's been in the same location since 1952 (helped that I used to work there) and found Rollei filters for it. But I sold the filters with the camera. It's amazing what is still stuck away in drawers of old stores, if the store still exists. Good luck with your search.

 

[Mustafa Umut Sarac]

Thank you ic-racer

That information was very useful , BH cuts 70 dollars for shipment and If I would be able to pay this amount , I would invest the 90mm Elmar Grey for my FED , 50 dollars plus the shipment. APUG is the best place to cut the shipping cost. That red filter and AA Orange Filter all I need and BH sample was perfect. One friend sent me an lightneter , it hasnt arrived yet and it will help a lot. After spending years without Leica -10 years - I am slowly starting again.
I think I want a hood nonflexible for match with my vietnamese 15 dollars sport shoes :and I dont know what I could find and buy next month.

Brian,

There is no fatherly, southern accent, good hearth , old men here who sells for 2 dollars. Oppositely , these peoples are wild and want your money too much.

Thank you all , great , I discovered there is a thread on lens barrel , I had had no idea how to attach a filter and the hood.

Umut

 

[mrosenlof]

Ah, I didn't see the Istanbul part until reading your last comment. I just yesterday received the Heliopan 30.5 metal lens hood. It's nice and small, probably only about 8mm deep, threaded for a 30.5 screw in lens cap or filter at the front. I like screw in metal lens caps and the combo fits well with my 35SE.

Haven't developed any film yet, so I can't confirm that the hood doesn't vignette, but it _looks_ like it won't.

It's a metal hood, marked Heliopan Digital E 30.5. Made in Germany, so you might find a place to buy it in the EU.

here's the item at B&H http://www.bhphotovideo.com/c/product/800552-REG/Heliopan_73015H_30_5_mm_Metal_Lens.html

 

[Too old to care]

I've used the rubber lens hood for decades on my 35SE, problem is the factory lens cap does not fit. B&H also sells a 30.5 mm lens cap that screws into the filter threads on the hood that works perfectly. http://www.bhphotovideo.com/c/product/805188-REG/Sensei_lcm30_5_30_5mm_Screw_In_Metal_Lens.html