Ferric Ammonium EDTA / Disodium EDTA?

Recent Classifieds

Forum statistics

Threads
199,123
Messages
2,786,505
Members
99,818
Latest member
Haskil
Recent bookmarks
0

Oscar Brown

Member
Joined
Oct 20, 2016
Messages
34
Location
Australia
Format
Multi Format
I have been interested in making my own c-41 and ra-4 chemicals for a while now, but I'm only just started to get back around to it using the recipes from http://www.bonavolta.ch/hobby/en/photo/c41_ra4_chemicals.htm
One thing that has stumped me, is what is Ferric Ammonium EDTA? And where can I buy it in Australia (or overseas as long as it can be shipped here) without it costing an arm and a leg.
For whatever reason, my shopping list which i created months ago, lists Disodium EDTA as i think an alternative, is that the case? Or did i just write that down for whatever reason. If it is an alternative, where can i also get Disodium EDTA?
Any help is much appreciated for an amateur
Cheers,
Oscar
 

dE fENDER

Member
Joined
Jun 17, 2016
Messages
188
Location
Moscow
Format
4x5 Format
I have been interested in making my own c-41 and ra-4 chemicals for a while now, but I'm only just started to get back around to it using the recipes from http://www.bonavolta.ch/hobby/en/photo/c41_ra4_chemicals.htm
One thing that has stumped me, is what is Ferric Ammonium EDTA?
It's one of the salts of EDTA (A means acid). A critical component of the color bleach.
And where can I buy it in Australia (or overseas as long as it can be shipped here) without it costing an arm and a leg.
For whatever reason, my shopping list which i created months ago, lists Disodium EDTA as i think an alternative, is that the case? Or did i just write that down for whatever reason. If it is an alternative, where can i also get Disodium EDTA?
Any help is much appreciated for an amateur
Cheers,
Oscar
You can use Ferric-Ammonium or Ferric salt, but Disodium salt has no ability to dissolve metallic silver. You may try to prepare it by yourself, using one of this recipes:
1. Ferric-Ammonium salt from EDTA (not salt): (there was a url link here which no longer exists)
2. Ferric salt from EDTA Disodium: dissolve 200g EDTA Disodium in 800 ml hot water. Then add 160 g FeCl3 * 6H20. Boil the mix while 1/6 part is left then put it to dry for a week in enamel/glass tray.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Here, for the first time, is my original blix, which became the RA4 blix.

Water 800 ml
Sodium Ferric EDTA 45 g (Purchasable at many places that supply chemicals)
Sodium Sulfite 10g
Ammonium Hypo (60% solution) 100 ml
Tetra Sodium EDTA 5 g
Dilute to 1L

pH 6.5 at 20C.

In some cases, you can substitute the following if you cannot get Sodium Ferric EDTA

Water 800 ml
NaOH 40% 26 ml
EDTA (free acid) 40 g
Ferric Chloride (FeCl3 . 6 H2O) 12 g
Sodium Sulfite 15 g
Sodium Hypo 150g
Water to 1L

pH 4.7 for paper.

This latter is very much slower. Take care adding the EDTA to the NaOH solution.

I will not vouch for image stability using either one.

PE
 

Halford

Member
Joined
Oct 18, 2009
Messages
120
Location
Wageningen, NL
Format
4x5 Format
FWIW EDTA stands for ethylene-diamine-tetraacetic acid. It is a chelating agent, which is to say it's an organic compound that 'wraps around' a biggish metal ion like FeIII and reduces its tendency to react with anything else in the surrounding matrix and, for example, form insoluble hydroxides. If you take an iron supplement it will usually be listed on the ingredient list as 'iron chelate' -- and is generally an EDTA complex like sodium ferric EDTA (You find it included in fertilizers / hydroponics media for the same reason). Also if you need treatment for heavy metal poisoning that is often done by injecting you with a bunch of EDTA to sequester the heavy metal ions and keep them from disrupting your nerve cell membranes etc.

So it's a really common chemical that you'll find from most any chemical supplier, though not typically from your local hardware store.
 

Rudeofus

Member
Joined
Aug 13, 2009
Messages
5,081
Location
EU
Format
Medium Format
You can use Sodium Ferric EDTA maybe for RA-4 as shown by PhotoEngineer, but I doubt it will properly bleach C-41 film. Due to its orange mask it will be hard to detect even egregiously incomplete bleaching.

If you can't get either EDTA free acid or Ammonium Ferric EDTA in Australia, there is a procedure for making EDTA free acid from EDTA Disodium Salt:
  1. Dissolve as much Na2-EDTA as possible in tap water. Solubility tables state something about 100g/l, in my experience you will get a bit less
  2. pour about 800ml of this solution into a beaker which can hold 1l or more
  3. add concentrated mineral acid, e.g. battery acid, muriatic acid, whatever you can get your (gloved) hands on
  4. EDTA free acid will form as white powdery precipitate, allow it to settle
  5. Pour out the clear liquid on top into some container for hazmat
  6. set up a funnel with a coffee filter, and filter the remaining liquid with the EDTA free acid powder
  7. Use deionized water to wash the filtrate. Don't wash too much, since EDTA is sparingly soluble in water.
  8. Dry the filtrate, then crush it into little chunks
With this method you should be able to obtain about 50-60 grams of EDTA free base, repeat or scale down at will to match your needs.

In order to turn this into Ammonium Ferric EDTA you need to do the following:
  1. Calculate how much Ammonium Ferric EDTA you need for your task
  2. Calculate how much EDTA free acid and how much Ferric ion this is equivalent to
  3. Calculate how much ferric salt (Ferric Nitrate, Ferric Sulfate, Ferric Cloride) this is equivalent to
  4. Add 3-5 % to the calculated EDTA amount
  5. Add that amount of EDTA into a beaker, fill with water up to 80% of required volume (or less of your ferric salt is too dilute)
  6. Add the ferric salt. The EDTA will not dissolve yet, don't worry.
  7. While vigorously stirring, slowly add Ammonia until all the EDTA is dissolved. Add some extra Ammonia to make sure you don't precipitate EDTA if another acid is added later. If you have a pH meter, try to get at or above pH 4.5.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
It turns out that the method outlined for making Ammonium Ferric EDTA does not work as well as desired. It can be done but not very well. We had to use Ferric Oxide and Ammonia gas with EDTA at high pressure and temps with some water to just dissolve the ingredients.

PE
 

Rudeofus

Member
Joined
Aug 13, 2009
Messages
5,081
Location
EU
Format
Medium Format
It turns out that the method outlined for making Ammonium Ferric EDTA does not work as well as desired. It can be done but not very well. We had to use Ferric Oxide and Ammonia gas with EDTA at high pressure and temps with some water to just dissolve the ingredients.
It has worked very well for me, and the resulting mixture of Ammonium Ferric EDTA and Ammonium Nitrate, together with Ammonium Bromide and a suitable bleach accelerator does a great job bleaching my slide film. I have used Ferric Nitrate Nonahydrate as source of Ferric ion, but will try the much more available Ferric Chloride soon. Some Ferric Oxide precipitates while I add Ammonia, but it dissolves within a few minutes. Funny thing is that the resulting mixture very closely resembles the bleach from (there was a url link here which no longer exists).

Obviously Ferric Oxide would work just as well, if one can find a good source for it. I would, however, strictly advise against using gaseous Ammonia outside special facilities, not to mention the combination of high pressure and high temperature.
 

Anon Ymous

Member
Joined
Feb 7, 2008
Messages
3,661
Location
Greece
Format
35mm
...Obviously Ferric Oxide would work just as well, if one can find a good source for it...

Ferric hydroxide is practically a hydrated form of ferric oxide. You can probably precipitate it from ferric chloride by reacting it with a hydroxide. NaOH should be fine, the resulting salt is very soluble. Ferric chloride is a pcb etchant and can be easily sourced (in the hexahydrate form IIRC).
 

Murray Kelly

Member
Joined
Jan 31, 2007
Messages
661
Location
Brisbane, Australia
Format
Sub 35mm
I have been interested in making my own c-41 and ra-4 chemicals for a while now, but I'm only just started to get back around to it using the recipes from http://www.bonavolta.ch/hobby/en/photo/c41_ra4_chemicals.htm
One thing that has stumped me, is what is Ferric Ammonium EDTA? And where can I buy it in Australia (or overseas as long as it can be shipped here) without it costing an arm and a leg.
For whatever reason, my shopping list which i created months ago, lists Disodium EDTA as i think an alternative, is that the case? Or did i just write that down for whatever reason. If it is an alternative, where can i also get Disodium EDTA?
Any help is much appreciated for an amateur
Cheers,
Oscar
Oscar, I know exactly how you feel. I bought a 1L kit to experiment with and stuffed up the bleach. After a lot of looking I ended up the KodacolorII rehalogenating bleach.

Iron chealate 100g Bunnings garden section)
KBr 50g Vanbar when they have it back in stock
Cloudy Ammonia 6ml Bunnings cleaning section
Water to 1L
(the end product is meant to be that awful colour)

To adjust pH (~6) I used pool lowering chems (Bunnings again) as either HCl or Sod. Bisulphate. You won't need much.
While you are at it pick up a tub of Borax to adjust the pH meter. It is Monohydrate in Oz. 1 pinch in 10ml. Very scientific.

Scales are cheap on the 'net as you doubtless know, but not everything needs the accuracy of the developer mix.

If you want to go down the Ferric chloride path Alltronics still stock it In my old books IIRC ferric chloride and oxalic acid (Bunnings) make a fair bleach but cannot comment on its usefulness in C-41.

I retreat into the bunker.
 
Last edited:

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Rudi, it works, but does not give the pure compound. It carries along the extra ions such as nitrate, chloride and etc.

PE
 

Rudeofus

Member
Joined
Aug 13, 2009
Messages
5,081
Location
EU
Format
Medium Format
Rudi, it works, but does not give the pure compound. It carries along the extra ions such as nitrate, chloride and etc.
I don't know about the chloride, but the nitrate definitely doesn't hurt. See my above comment:
Funny thing is that the resulting mixture very closely resembles the bleach from (there was a url link here which no longer exists).

I will definitely try the Ferric Chloride at some point in time, since that's the compound which I can get by far most easily. Ferric Oxide shouldn't be too difficult either, Keten has it listed for 10€/kg.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
E6 does not use a stop and does use HQMS-K. So, these recipes are not "exact" and may not work well with all films.

As for the extra salts such as Nitrate and Chloride, they work for E6 but are not used for C41. That is all I can say now.

PE
 

RPC

Member
Joined
Sep 7, 2006
Messages
1,630
Format
Multi Format
I have been interested in making my own c-41 and ra-4 chemicals for a while now, but I'm only just started to get back around to it using the recipes from http://www.bonavolta.ch/hobby/en/photo/c41_ra4_chemicals.htm
One thing that has stumped me, is what is Ferric Ammonium EDTA? And where can I buy it in Australia (or overseas as long as it can be shipped here) without it costing an arm and a leg.
For whatever reason, my shopping list which i created months ago, lists Disodium EDTA as i think an alternative, is that the case? Or did i just write that down for whatever reason. If it is an alternative, where can i also get Disodium EDTA?
Any help is much appreciated for an amateur
Cheers,
Oscar

Search APUG and you will find better formulas, particularly C-41 developers, than at the link given.
 

Rudeofus

Member
Joined
Aug 13, 2009
Messages
5,081
Location
EU
Format
Medium Format
As for the extra salts such as Nitrate and Chloride, they work for E6 but are not used for C41.
Modern C-41 process uses Ammonium Ferric PDTA, not EDTA. I mix my Ammonium Ferric PDTA from Ferric Nitrate, PDTA and Ammonia, any my bleach does its job. Since Ammonium Ferric PDTA is a stronger oxidizer than Ammonium Ferric EDTA, and the Ammonium Ferric PDTA based bleach is much more dilute, the extra Ammonium Nitrate in my concoction should hurt much less than in E6 bleach (less ionic strength to begin with).
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Rudi, I know that PDTA is used. It gives a stronger bleaching action compared to the old EDTA, and by using home made EDTA bleaching is slower. Bleaching is so hard that modern films need the activity. In fact, bleach accelerators are added to the films to assist.

So, unless you can get the developed silver in a Dmax area below about 1 - 3 mg / ft square, your image will be adversely affected. This is why I suggest using the 6 - 8 min bleach and then fix times with films if an EDTA bleach is used.

PE
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom