-
Welcome to Photrio!Registration is completely free and logged-in members see fewer ads.Click here to sign up
Exact measurements for Jobo 2500 spools?
-
A
- Thread starter MCB18
- Start date
Recent Classifieds
-
For Sale Hasselblad / Imacon Flextight X1 scanner
- Started by FulvioB
-
Sold Yashica No. 2 Close-up Lens Set for Bay-I TLR - Minty
- Started by davela
-
For Sale Mint Nikon AF Lenses
- Started by Barlow
-
Sold SOLD!
- Started by B.S.Kumar
-
Sold SOLD!
- Started by B.S.Kumar
Forum statistics
The OD of the core / center column is 24.5mm on mine. The reel is a snug fit onto this.
The tank itself has some ribs to hold in sheets if it's used that way (small clips slide onto those); the diameter inside those ribs is approx. 131.5mm with the ribs protruding ca. 1mm into the tank. I have a 2509N reel here which measures 128.5mm OD (outer rim). Its height is 105mm.
Note that the center column is raised off the bottom of the tank by about 22mm, so the inside of the reel is shorter overall than along the outer rim.
The tank itself has some ribs to hold in sheets if it's used that way (small clips slide onto those); the diameter inside those ribs is approx. 131.5mm with the ribs protruding ca. 1mm into the tank. I have a 2509N reel here which measures 128.5mm OD (outer rim). Its height is 105mm.
Note that the center column is raised off the bottom of the tank by about 22mm, so the inside of the reel is shorter overall than along the outer rim.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |