ETone archival pages for 6x9 negatives

[Hassasin]

Now this: anyone uses these for 6x9 negs ( ~ 6.5 x 9 cm) . Description is showing slot dimensions as 6.6 x 9 cm which may or may not easily work the negs in and out. If anyone can confirm would be helpful.

 

[loccdor]

Looks like it should work fine. I have bought 9 one liter plastic darkroom bottles from eTone and have been satisfied. They store my C-41 and E-6 chemicals well without oxidization.

 

[Hassasin]

For what it'd worth, I dug up some older thread here on the subject and Adox came back with actual dimensions of sheet film is 6.35 x 8.85, so these pages should be OK. I have to assume what Adox produces is based on an official standard.

 

[loccdor]

Good that it works for you. I thought you were talking about 6x9 on roll film. Didn't see that this thread is posted in the large format forum.

 

[Hassasin]

Quick update, bought eTone focusing loupe (it's fine, all metal, seems to be similar to what Horseman once was) and a package of negative pages (for 4x5).

The pages are just OK, maybe they will last. The way each compartment is sealed is not giving me confidence. But what is worse is the area to print notes on. It is a piece of heavy paper that is supposed to be slid into a top compartment. The idea may be O,K if one reuses a page, brand new strip can be put in , but given strips are too wide, so they won't slide in without trimming and no matter what, edge seal is likely to break as it is just a product of hot cutting. I don't like it and so long as PrintFile pages can be had, this is a no.