Durst Laborator diagrams

[paul_c5x4]

After humming and hawing about getting a DeVere 5108, I bagged a Durst Laborator L1200 with a CLS500 head instead. Paid peanuts for it as it is missing a lens board and PSU - Neither are a major problem.. However, the adjuster for Yellow is missing (broken off at the casing), and the fine focus is hanging on by a prayer.

Before I begin dismantling the head, does anyone have an exploded diagram that they could send me ?


[BTW also collected a bunch of assorted cr*p - If anyone wants a Durst M670 head & column, or a Jobo/LPL C6600 colour head, PM me (UK only)]

 

[largeformat pat]

http://www.jensen-optical.us/enter_site.htm Try this site they have a lot of information on Durst

 

[mpirie]

Hi Paul,

I have an L1000 with the CLS450 and MG500 heads so if you need me to get close up photo's etc for any of the parts your missing, just let me know.

I'm missing one of the flattened bars that connect the colour filter adjusters to the head, but i'll just need to make one (when I get round to it).

Mike