Eliot
Member
- Joined
- Jan 21, 2016
- Messages
- 9
- Format
- Multi Format
So I saw this article a couple years ago and thought it might be an interesting thing to try out. Apparently loading color film into your camera backwards will result in a red scale effect. However, I'm assuming you would also need to compensate for the film's tint by lowering the ISO settings. Does anyone know how much I would need to lower my ISO from the film's original ISO to achieve a correct exposure?
I'm new around here and can't post the link to the article, but just type 'DIY Red Scale Film' into a Google search and the first 2 links are what I'm talking about.
Towards the bottom of the DIYPhotography article, the author briefly mentions that it is rated at 100ISO, but I'm assuming that number would change depending on the film's original rated ISO. He's using 800, so if 800:100, then what would 400 or 200 be?
I'm new around here and can't post the link to the article, but just type 'DIY Red Scale Film' into a Google search and the first 2 links are what I'm talking about.
Towards the bottom of the DIYPhotography article, the author briefly mentions that it is rated at 100ISO, but I'm assuming that number would change depending on the film's original rated ISO. He's using 800, so if 800:100, then what would 400 or 200 be?