DeVere 504 Dichromat, New Owner Questions.

Frank Dean,  Blacksmith

A
Frank Dean, Blacksmith

  • 5
  • 3
  • 45
Woman wearing shades.

Woman wearing shades.

  • 0
  • 1
  • 52
Curved Wall

A
Curved Wall

  • 5
  • 0
  • 81
Crossing beams

A
Crossing beams

  • 9
  • 1
  • 104
Shadow 2

A
Shadow 2

  • 5
  • 1
  • 75

Recent Classifieds

Forum statistics

Threads
198,841
Messages
2,781,690
Members
99,725
Latest member
saint_otrott
Recent bookmarks
0

Iloca

Member
Joined
Feb 22, 2006
Messages
7
Location
Northern Ire
Format
Multi Format
Hi Folks,

I've just registered and here I am seeking help already!! I've bought a DeVere 504 Dichromat, I think it's an early model, Brown/Cream, 3 filter wheels which rotate vertically and Single lamp. I bought it used and don't have a User Manual so..

1. Is the Manual worth spending £25 on? what sort of information does it provide?

2. Would you recommend using glass or glassless negative holders?

3. If using glass holders, are they used with or without the metal masks?

4. Would a Viponel S15 timer be suitable, I have the plug to suit the Transtab transformer, or is there a specific timer you would recommend?

Thanks in Advance, Richard
 
Joined
Oct 20, 2004
Messages
1,093
Location
Fond du Lac, WI
Format
Multi Format
I'm not an expert, but I regularly use three De-Vere enlargers. So in response to your questions:

1. Yes, I thought so.
2. Glass leads to better overall sharpness, but there's more spotting to do. I use glass.
3. They are used without metal masks.
4. I don't know anyting about Viponel timers. De-Vere timers are simple and work very well. (I have two spare ones.) The best timer, imho, is an RH Designs Stop Clock Pro, which is what I use with my De-Veres.

Regards,
Peter De Smidt
 

Sparky

Member
Joined
Jun 19, 2005
Messages
2,096
Location
Los Angeles
Format
Multi Format
halfsies - well, not quite.

if it makes it any more tempting... I'll throw in 40% if you send me copies... or 60% for the original.
 
OP
OP

Iloca

Member
Joined
Feb 22, 2006
Messages
7
Location
Northern Ire
Format
Multi Format
Hi Peter,

thanks for the information. I ordered a Manual from KHB Photo.

Re. the glass, do you get different sizes for different formats?

If I wanted to set-up to enlarge, say 6x6 rather than 5x4 (which is how mine is currently set up), what do I need to change? I'm thinking len's, probably lens board, anything else?


Richard
 
Last edited by a moderator:

Mick Fagan

Subscriber
Joined
Sep 13, 2005
Messages
4,421
Location
Melbourne Au
Format
Multi Format
Richard, my De Vere 4x5 Dichromat has two light boxes for inside the head.

At the front of the head there is the little louvred slot that swings out to replace the light globe and check the filters.

In the middle there is a large cover that hides the light mixing chamber, you should have two, one for 4x5 and one for 6x7 (ish) and under. My cover is held firmly in place by two fridge type magnets that are quite strong, a bit of pulling is required.

I personally leave the 4x5 one in all of the time as I find it slows printing times by about a 1/3 of a stop, other than that there is nothing else you need to do.

Happy printing.

Ps:- is yours a tabletop or a free standing with the drop table?

Mick.
 
OP
OP

Iloca

Member
Joined
Feb 22, 2006
Messages
7
Location
Northern Ire
Format
Multi Format
Hi Mick,

mine must be a different model, it has a small cover for the lamp and filters which is about 1/3 of the total width of the head, the remaing 2/3 is taken up with a mixing chamber and fan. The mixing chamber has a small handle and clips into place, one clip at the front 1/4 way up from the bottom and another on the back.

Mine's a table top model but as I don't have enough headroom to set it on the bench it's set on the floor, a "low profile floor model" LOL

Do you use metal or glass carriers?


Cheers, Richard
 
Joined
Oct 20, 2004
Messages
1,093
Location
Fond du Lac, WI
Format
Multi Format
The carrier frame can hold metal masks or glass plates. There's only one size of glass plates, 4x5. You can use the masking blades to cut down stray light when you use smaller negatives with the glass plates, or you can make an opaque mask with the proper size hole (6x6, 6x7, 6x7...) which you can sandwich above the negative. The metal and glass plates are beveled on two edges, and hence you have to get ones specially made, either from De Vere, or from a place like Focal Point in Florida.
 
OP
OP

Iloca

Member
Joined
Feb 22, 2006
Messages
7
Location
Northern Ire
Format
Multi Format
Thank you Peter, I think I may go for the glass plates as the individual metal carriers seem quite expensive from what I've seen. I'll try to contact Focal Point regarding shipping to the UK. Looking forward to getting the manual as it should help fill in the gaps.

Richard
 
Joined
Oct 20, 2004
Messages
1,093
Location
Fond du Lac, WI
Format
Multi Format
Iloca said:
Thank you Peter, I think I may go for the glass plates as the individual metal carriers seem quite expensive from what I've seen. I'll try to contact Focal Point regarding shipping to the UK. Looking forward to getting the manual as it should help fill in the gaps.

Richard

You might want anti-newton ring glass for the top plate. Another place to check is Light Wave in London. They have tons of experience with De Vere.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom