Developing 2-1/4 X 3-1/4 sheets film...in what?

[Whiteymorange]

Nikor made a nifty little holder for 6 sheets of 2 1/4 x 3 1/4 film that fit into a SS 120 tank. It came with a feeder that helped you place the film in correctly, though I don't think it's necessary. I just bought one at the PHSNE show, new-in-box. Look around for one or PM me. I have two now and might think of selling one for a princely sum.

OOPS! Didn't notice the date on the OP. Probably not still looking...

 

[JPLBOUND]

Nikor 2x3 cut film tank

Does anyone have a copy of the instructions for using a Nikor 2x3 cut film insert (tank). The instructions are harder to find than the inserts! Thanks so much

 

[rjmeyer314]

I've developed 2x3 sheet film in trays, stainless hangers in deep tanks of various sizes, and in the Yankee tank. I second donkee, I've always had fine results with the Yankee tank, that's my favorite way of doing 2x3, 3x4, and 4x5 sheet film.

 

[frobozz]

Does anyone have a copy of the instructions for using a Nikor 2x3 cut film insert (tank). The instructions are harder to find than the inserts! Thanks so much

One of these just sold for $25 on ebay three days ago, and had the instructions with it!

Duncan

 

[randyB]

My Combi-Plan won't hold 2x3, the smallest size is 6.5cm x 9cm. I just used a film clip to dip and dunk my 2x3 in a small Paterson tank in the dark of course. Worked ok for the few sheets I had to process.

 

[bdial]

Here are the instructions for the Nikor tank insert.

It works pretty well, though it's easy to load two sheets into a slot.