Delta 100 in Rodinal

Approaching fall

D
Approaching fall

  • 3
  • 0
  • 67
Heads in a freezer

A
Heads in a freezer

  • 4
  • 0
  • 1K
Route 45 (Abandoned)

A
Route 45 (Abandoned)

  • 2
  • 0
  • 1K
Sonatas XII-48 (Life)

A
Sonatas XII-48 (Life)

  • 2
  • 3
  • 2K
Waldsterben

D
Waldsterben

  • 3
  • 0
  • 2K

Recent Classifieds

Forum statistics

Threads
199,694
Messages
2,795,358
Members
100,003
Latest member
cortessaavedra
Recent bookmarks
0

brian steinberger

Subscriber
Joined
Jan 5, 2007
Messages
3,016
Location
Pennsylvania
Format
Med. Format RF
I ran my first tests tonight with 120 Delta 100 EI 50 in Rodinal 1:50 at 68 degrees for 9 minutes with a 2 minute presoak. Way OVERCOOKED! My agitation is first min. constant agitation, then 10 sec every minute. Anyone have recommended times for this combo? The shadow detail is very good at EI50, but with the negs being overcooked I could probably get away with EI64. Thanks!
 

wildbill

Member
Joined
Nov 28, 2004
Messages
2,828
Location
Grand Rapids
Format
Multi Format
Don't presoak ilford films. When i shot the stuff, i rated it at 125 for rodinal and used the massive dev chart times. This is my opinion of course. i'm not a fan of the film any longer.
digitaltruth.com
 

Mike Richards

Member
Joined
Jan 30, 2005
Messages
115
Location
Preveza, Gre
Format
35mm RF
My Delta/Rodinal Experience

FWIW, I also used the massive dev chart with 1:25 Rodinal and Delta 100 at EI100 (this is also 9 minutes). Format was 35mm, not 120, and metering was auto with Leica M7. No pre-soak, 30 secs agitation to start and then 3 slow inversions (about 5 secs) every minute. This is my normal routine. Results were ok. See the Fruit Vendor Pals for an example.

I honestly can't see why yours were overcooked, as it looks like you did everything right. It's hard to believe that pre-soak and agitation would have a such a dramatic effect. Nor does the 35mm vs 120 format seem to explain anything. Are you confident with your metering?
 

Mackinaw

Member
Joined
Jan 2, 2005
Messages
705
Location
One hour sou
Format
Multi Format
I can tell you what I do. Delta 100, E.I. of 100, Rodinal 1 + 50, 14' 30" at 67 degrees F. Agitate first 30 seconds then five seconds every two minutes. This combo works well for me.

Jim Bielecki
 

Tom Stanworth

Member
Joined
Sep 4, 2003
Messages
2,021
Format
Multi Format
I ran my first tests tonight with 120 Delta 100 EI 50 in Rodinal 1:50 at 68 degrees for 9 minutes with a 2 minute presoak. Way OVERCOOKED! My agitation is first min. constant agitation, then 10 sec every minute. Anyone have recommended times for this combo? The shadow detail is very good at EI50, but with the negs being overcooked I could probably get away with EI64. Thanks!

Are you using a condenser or diffuser head ?
 

BWGirl

Member
Joined
May 15, 2004
Messages
3,049
Location
Wisconsin, U
Format
Multi Format
The thing with rodinal is that you must use slow agitation. That cannot be emphasized enough! :smile:
Also... with most of the films today there is almost no reason to pre-soak film. It's especially not necessary with Ilford films. I use Ilford, Fuji Acros & APX 100 and have never had to do a pre-soak with any of them.

I use 1:50 at 14 minutes, 68deg F, agitation (very slow) for first 15 seconds, then 4 slow "twist-y" inversions at each minute.
 

dxphoto

Member
Joined
Nov 25, 2005
Messages
196
Format
35mm
I used Delta100 EI100 with Rodinal (1+50), followed the rodinal instruction on the bottle. It came out nicely.

Now I use foma200 with Rodinal 1+50.
 
OP
OP
brian steinberger

brian steinberger

Subscriber
Joined
Jan 5, 2007
Messages
3,016
Location
Pennsylvania
Format
Med. Format RF
Tom,

I'm using a diffusion head. I'm very confident in my metering. I couldn't imagine the presoak being responsible for such dense highlights. My agitation is normal to what I use with other combos. I've never heard about slow agitation with rodinal.
 

Zathras

Subscriber
Joined
Nov 9, 2004
Messages
822
Location
SF Bay Area
Format
Multi Format
Tom,

I'm using a diffusion head. I'm very confident in my metering. I couldn't imagine the presoak being responsible for such dense highlights. My agitation is normal to what I use with other combos. I've never heard about slow agitation with rodinal.

I've found out that proper agitation is a important factor for success with Rodinal, with my best results coming from gentle inversions and longer intervals between those inversions. I haven't nailed down Delta 100 yet, I don't shoot it that often, but Acros souped in Rodinal is AWESOME:D I dilute Rodinal 1+100 and devlop it for 18 minutes at 70° F. I start out with thirty seconds of gentle inversions , 2 seconds for each inversion, then 2 inversions every 3 minutes for theremaining time, followed by a 2 minute running water rinse and regular fixing, hypo clearing and washing proceedures. When I get everything right, eposure, focus and printing, the results can be stuning., even with 35mm and a condenser head.

Mike Sullivan
 

Lee L

Member
Joined
Nov 17, 2004
Messages
3,281
Format
Multi Format
I've never heard about slow agitation with rodinal.

If you're curious, and have some serious time to kill, a search of APUG for "stand rodinal" pulls up 293 threads. :smile: There should be a couple more by next week.

Lee
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom