For Sale Darkroom overload sale: Jobo, Nova and other stuff

[anikin]

The winter rains came in early this year. I need to free up space for my car in the darkroom aka garage.
See the picture for items. Unless otherwise noted, prices are net to me and do not include shipping and Paypal fees.

Jobo 20x24 3063 drum. $200

Paterson (?) 11x14 auto print washer. Works like a charm, I only need one print washer, not four. $75

Set of enlarger lenses: Schneider componar-C 50mm f/2.8, Neotar 75mm f/4.5, Rodenstock Omegaron 105mm f/4.5, Rodenstock Rodagon 50mm f/2.8. I only have 1 retaining ring for these, however it fits them all. $20 donation to APUG.

Nova 8x10 b/w processor. Simple compact and effective. $50

Nova 16x20 print washer or a 1-slot add-on to your NOVA processor. A small piece was chipped by a previous owner, see picture. Does not affect operation in any way. $85

Bogen 11x14 two blade easel. $5 donation to APUG + shipping.

A large flip print dryer. Very-very clean. I don't think it was ever used before me. I dried maybe 4 prints on it. Works great for fiber prints. Rather heavy and large, not sure what the shipping is going to cost. Make an offer.

A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.

Two bulk loaders. One with Umax T-grain 400 film, another with Portra 160 film. Both with more than a half of the film left. Both films are out of date and were sitting in my garage for couple of years. No guarantees, but I'm sure they both are useful. $30.

Beseler base with 16x20 and 11x14 drums. Sirius Glass "the silver tongue" convinced me to keep the Jobo CPA-2, so I need to get rid of this processor/drum set. I modified the base - added the switch for one or two-directional rotation. $75

More than a half of 5"x520ft roll of Supra III paper. Slightly fogged from sitting in a warm garage. The whites now show light blue/green tinge. Might be good for pinhole/paper neg/solarprint experimentation. $5 donation to APUG.

Set of 4 patterson system 4 plastic reels. Very clean, I think they are unused. $20

Jobo drum with 4 reels. It is convertible to 1 reel of 35mm, or 4 35mm or 2 120. $30

Oh and please let me know if my prices are off the rockers.

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[anikin]

Enlarger lenses and potentially the easel are spoken for pending payment.

 

[PKM-25]

PM sent on 3063 drum...

 

[Steve Smith]

Putting a car in a garage? What a waste of space!


Steve.

 

[nreeque]

PM sent

 

[anikin]

Putting a car in a garage? What a waste of space!


Steve.

I would agree with you. Unfortunately my 1996 Civic leaks water into the trunk if I leave it outside in rain. The aquarium in the trunk does not bother me too much, but after a while the car starts to stink. I can camouflage by eating a lot of chili with beans, but my passengers start to gasp for air for some reason

 

[anikin]

SOLD: Jobo 20x24 3063 drum. $200

AVAILABLE: Paterson (?) 11x14 auto print washer. Works like a charm, I only need one print washer, not four. $75

SALE PENDING: Set of enlarger lenses: Schneider componar-C 50mm f/2.8, Neotar 75mm f/4.5, Rodenstock Omegaron 105mm f/4.5, Rodenstock Rodagon 50mm f/2.8. I only have 1 retaining ring for these, however it fits them all. $20 donation to APUG.

SALE PENDING: Nova 8x10 b/w processor. Simple compact and effective. $50

SALE PENDING: Nova 16x20 print washer or a 1-slot add-on to your NOVA processor. A small piece was chipped by a previous owner, see picture. Does not affect operation in any way. $85

SALE PENDING: Bogen 11x14 two blade easel. $5 donation to APUG + shipping.

AVAILABLE: A large flip print dryer. Very-very clean. I don't think it was ever used before me. I dried maybe 4 prints on it. Works great for fiber prints. Rather heavy and large, not sure what the shipping is going to cost. Make an offer.

SALE PENDING: A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.

AVAILABLE: Two bulk loaders. One with Umax T-grain 400 film, another with Portra 160 film. Both with more than a half of the film left. Both films are out of date and were sitting in my garage for couple of years. No guarantees, but I'm sure they both are useful. $30.

AVAILABLE: Beseler base with 16x20 and 11x14 drums. Sirius Glass "the silver tongue" convinced me to keep the Jobo CPA-2, so I need to get rid of this processor/drum set. I modified the base - added the switch for one or two-directional rotation. $75

AVAILABLE: More than a half of 5"x520ft roll of Supra III paper. Slightly fogged from sitting in a warm garage. The whites now show light blue/green tinge. Might be good for pinhole/paper neg/solarprint experimentation. $5 donation to APUG.

SALE PENDING: Set of 4 patterson system 4 plastic reels. Very clean, I think they are unused. $20

SOLD: Jobo drum with 4 reels. It is convertible to 1 reel of 35mm, or 4 35mm or 2 120. $30

 

[Peter Simpson]

Unfortunately my 1996 Civic leaks water into the trunk if I leave it outside in rain.

What? You never heard of duct tape?

//trunks are overrated (except, of course, when there's free stuff being given away!)
//or you could just drill a hole in the bottom...my Camry had a rubber plug I could pull to drain it

 

[anikin]

Some items have sold, some are back on the list:

AVAILABLE: Paterson (?) 11x14 auto print washer. Works like a charm, I only need one print washer, not four. $75

AVAILABLE: Nova 8x10 b/w processor. Simple compact and effective. $50

AVAILABLE: Nova 16x20 print washer or a 1-slot add-on to your NOVA processor. A small piece was chipped by a previous owner, see picture. Does not affect operation in any way. $85

AVAILABLE: A large flip print dryer. Very-very clean. I don't think it was ever used before me. I dried maybe 4 prints on it. Works great for fiber prints. Rather heavy and large, not sure what the shipping is going to cost. Make any offer.

AVAILABLE: Two bulk loaders. One with Umax T-grain 400 film, another with Portra 160 film. Both with more than a half of the film left. Both films are out of date and were sitting in my garage for couple of years. No guarantees, but I'm sure they both are useful. $30.

AVAILABLE: Beseler base with 16x20 and 11x14 drums. Sirius Glass "the silver tongue" convinced me to keep the Jobo CPA-2, so I need to get rid of this processor/drum set. I modified the base - added the switch for one or two-directional rotation. $75

AVAILABLE: More than a half of 5"x520ft roll of Supra III paper. Slightly fogged from sitting in a warm garage. The whites now show light blue/green tinge. Might be good for pinhole/paper neg/solarprint experimentation. $5 donation to APUG.



WAITING FOR RESPONSE: A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.

WAITING FOR RESPONSE: Set of 4 patterson system 4 plastic reels. Very clean, I think they are unused. $20



SOLD: Jobo drum with 4 reels. It is convertible to 1 reel of 35mm, or 4 35mm or 2 120. $30
SOLD: Jobo 20x24 3063 drum. $200
SOLD: Set of enlarger lenses: Schneider componar-C 50mm f/2.8, Neotar 75mm f/4.5, Rodenstock Omegaron 105mm f/4.5, Rodenstock Rodagon 50mm f/2.8. I only have 1 retaining ring for these, however it fits them all. $20 donation to APUG.
SOLD: Bogen 11x14 two blade easel. $5 donation to APUG + shipping.

 

[anikin]

Updating the list:


AVAILABLE: Nova 16x20 print washer or a 1-slot add-on to your NOVA processor. A small piece was chipped by a previous owner, see picture. Does not affect operation in any way. $85

AVAILABLE: A large flip print dryer. Very-very clean. I don't think it was ever used before me. I dried maybe 4 prints on it. Works great for fiber prints. Rather heavy and large, not sure what the shipping is going to cost. Make any offer.

AVAILABLE: Two bulk loaders. One with Umax T-grain 400 film, another with Portra 160 film. Both with more than a half of the film left. Both films are out of date and were sitting in my garage for couple of years. No guarantees, but I'm sure they both are useful. $30.

AVAILABLE: Beseler base with 16x20 and 11x14 drums. Sirius Glass "the silver tongue" convinced me to keep the Jobo CPA-2, so I need to get rid of this processor/drum set. I modified the base - added the switch for one or two-directional rotation. $75

AVAILABLE: More than a half of 5"x520ft roll of Supra III paper. Slightly fogged from sitting in a warm garage. The whites now show light blue/green tinge. Might be good for pinhole/paper neg/solarprint experimentation. $5 donation to APUG.

AVAILABLE: Set of 4 patterson system 4 plastic reels. Very clean, I think they are unused. $20



WAITING FOR RESPONSE: A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.

WAITING FOR RESPONSE: Nova 8x10 b/w processor. Simple compact and effective. $50


SOLD: Jobo drum with 4 reels. It is convertible to 1 reel of 35mm, or 4 35mm or 2 120. $30
SOLD: Jobo 20x24 3063 drum. $200
SOLD,pending payment: Set of enlarger lenses: Schneider componar-C 50mm f/2.8, Neotar 75mm f/4.5, Rodenstock Omegaron 105mm f/4.5, Rodenstock Rodagon 50mm f/2.8. I only have 1 retaining ring for these, however it fits them all. $20 donation to APUG.
SOLD,pending payment: Bogen 11x14 two blade easel. $5 donation to APUG + shipping.
SOLD,pending payment: Paterson (?) 11x14 auto print washer. Works like a charm, I only need one print washer, not four. $75

 

[Thomas Bertilsson]

I'm interested in the Nova 16x20 print washer. Can you tell me how many prints fit in it, and roughly how much shipping would be to Minneapolis, Minnesota?

 

[anikin]

Hi Thomas,

It is a single slot washer. So only one 16x20 sheet can be washed in it. For fiber, I was using it as a pre-rinse slot after fixer and before the siphon tray washer. This way most of the fixer is gone before entering the main wash tray.
Shipping will be about $30.

Thanks,

Eugene.

 

[Thomas Bertilsson]

Thanks, Eugene. I will have to pass. I need a washer that can handle at least a handful prints at a time. Thanks for taking the time to explain.

 

[anikin]

Updating the list:


AVAILABLE: Nova 16x20 print washer or a 1-slot add-on to your NOVA processor. A small piece was chipped by a previous owner, see picture. Does not affect operation in any way. $85

AVAILABLE: A large flip print dryer. Very-very clean. I don't think it was ever used before me. I dried maybe 4 prints on it. Works great for fiber prints. Rather heavy and large, not sure what the shipping is going to cost. Make any offer.

AVAILABLE: Beseler base with 16x20 and 11x14 drums. Sirius Glass "the silver tongue" convinced me to keep the Jobo CPA-2, so I need to get rid of this processor/drum set. I modified the base - added the switch for one or two-directional rotation. $75

AVAILABLE: More than a half of 5"x520ft roll of Supra III paper. Slightly fogged from sitting in a warm garage. The whites now show light blue/green tinge. Might be good for pinhole/paper neg/solarprint experimentation. $5 donation to APUG.

AVAILABLE: Set of 4 patterson system 4 plastic reels. Very clean, I think they are unused. $20



WAITING FOR RESPONSE: A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.

WAITING FOR RESPONSE: Nova 8x10 b/w processor. Simple compact and effective. $50


SOLD: Jobo drum with 4 reels. It is convertible to 1 reel of 35mm, or 4 35mm or 2 120. $30
SOLD: Jobo 20x24 3063 drum. $200
SOLD: Set of enlarger lenses: Schneider componar-C 50mm f/2.8, Neotar 75mm f/4.5, Rodenstock Omegaron 105mm f/4.5, Rodenstock Rodagon 50mm f/2.8. I only have 1 retaining ring for these, however it fits them all. $20 donation to APUG.
SOLD: Bogen 11x14 two blade easel. $5 donation to APUG + shipping.
SOLD: Paterson (?) 11x14 auto print washer. Works like a charm, I only need one print washer, not four. $75
SOLD: Two bulk loaders. One with Umax T-grain 400 film, another with Portra 160 film. Both with more than a half of the film left. Both films are out of date and were sitting in my garage for couple of years. No guarantees, but I'm sure they both are useful. $30.

 

[anikin]

Thanks, Eugene. I will have to pass. I need a washer that can handle at least a handful prints at a time. Thanks for taking the time to explain.

Yes, it's not terribly useful on its own. But I found it to be a great addition to a Nova processor, especially if you do RC prints. It's just I've got a good deal on a versalab 16x20/20x24 washer from an evil tempter at Citizen's Photo which I simply could not resist, and because of it I ran out of counter spaces for all my darkroom equipment

 

[anikin]

Another list update:


AVAILABLE: Nova 16x20 print washer or a 1-slot add-on to your NOVA processor. A small piece was chipped by a previous owner, see picture. Does not affect operation in any way. $85

AVAILABLE: A large flip print dryer. Very-very clean. I don't think it was ever used before me. I dried maybe 4 prints on it. Works great for fiber prints. Rather heavy and large, not sure what the shipping is going to cost. Make any offer.

AVAILABLE: Beseler base with 16x20 and 11x14 drums. Sirius Glass "the silver tongue" convinced me to keep the Jobo CPA-2, so I need to get rid of this processor/drum set. I modified the base - added the switch for one or two-directional rotation. $75

AVAILABLE: More than a half of 5"x520ft roll of Supra III paper. Slightly fogged from sitting in a warm garage. The whites now show light blue/green tinge. Might be good for pinhole/paper neg/solarprint experimentation. $5 donation to APUG.

AVAILABLE: Set of 4 patterson system 4 plastic reels. Very clean, I think they are unused. $20

AVAILABLE: A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.



SOLD: Nova 8x10 b/w processor. Simple compact and effective. $50
SOLD: Jobo drum with 4 reels. It is convertible to 1 reel of 35mm, or 4 35mm or 2 120. $30
SOLD: Jobo 20x24 3063 drum. $200
SOLD: Set of enlarger lenses: Schneider componar-C 50mm f/2.8, Neotar 75mm f/4.5, Rodenstock Omegaron 105mm f/4.5, Rodenstock Rodagon 50mm f/2.8. I only have 1 retaining ring for these, however it fits them all. $20 donation to APUG.
SOLD: Bogen 11x14 two blade easel. $5 donation to APUG + shipping.
SOLD: Paterson (?) 11x14 auto print washer. Works like a charm, I only need one print washer, not four. $75
SOLD: Two bulk loaders. One with Umax T-grain 400 film, another with Portra 160 film. Both with more than a half of the film left. Both films are out of date and were sitting in my garage for couple of years. No guarantees, but I'm sure they both are useful. $30.

 

[anikin]

$25 for the easel and lenses has been donated to APUG. Transaction ID: 48E02980XG460902S

 

[PKM-25]

Got my 3063 drum, looks great ( huge )....now to try and figure out how to get the lid off, it will take a lot of water to fill it in order for me to use my reverse plunger trick...

 

[anikin]

Got my 3063 drum, looks great ( huge )....now to try and figure out how to get the lid off, it will take a lot of water to fill it in order for me to use my reverse plunger trick...

Dan,

Thank you for letting me know. I'm glad it made it safely. Taking the lid off is rather difficult, especially if you did a good job seating it in before processing . I usually put the drum between my feet and use fingernails on both sides to evenly slide it off.
I don't fill it with water to pull the paper out. I just try to grab the paper on opposite sides of the drum and carefully slide it out. I don't know how well it would work with the fiber though...

Good luck!

Eugene.

 

[starcade design]

Interested in this:

AVAILABLE: A slightly rusty, but fully working Gralab 300 timer, Yankee twirl-stick tank with reel, focuser, air-evac bottle, trays and tongs. A beginner darkroom set. $15 donation to APUG.

Wish I'd caught this in time for the Bogen easel as well.

What size are the trays?

 

[anikin]

They trays measure exactly 11x14 on the bottom.

 

[starcade design]

Do I need to add shipping or is it just the $15 donation?

 

[anikin]

Yes, shipping is extra. Whatever the actual cost is.

 

[starcade design]

Can you get me an estimate on shipping to 43812? Thanks

 

[anikin]

The shipping comes up to $17 by parcel post.