For Sale Dark room stuff

[nbagno]

Bought a Jobo, came with a bunch of stuff I won't use. Make me an offer. Located in the SF Bay area so consider that if it needs to be shipped. If your interested, I can take some pictures for you.

1. Jobo 1520 Tank w/magnet and 1 plastic jobo reel
2. Beseler PM2L color analyzer
3. Phillips PLA2060 color analyzer w/manual
4. X3 8x10 processing trays with tongs
5. Nova deep tank print processor w/integral washer and manual
6. Unknown made in Japan s.s. inversion tank w/2 35mm s.s. reels
7. Unknown s.s. inversion tank w/ 1 35mm s.s. reel
8. Bestwell optical minisight grain focuser w/ x2 eye pieces
9. Sanders super proofer
10. Premier 4 in 1 easel
11. CMP projection print calculator scale
12. Durst M670 color enlarger
    1. w/ Nikkor 50mm f2.8N lens
    2. Saunders ET-400 enlarging timer
    3. Vegabox 667 medium format mixing box
    4. Durst Sivopar 35 mask
    5. Durst Sivopar 45 mask
    6. Durst Sivopar 66 mask
    7. Durst Sivma 67 mask
    8. Durst Suvigka AN anto newton glass
13. Darkroom handbook ISBN 0-394-72768-2 by Michael Langford

 

[calebarchie]

I'm assuming the step wedge is this?

http://www.fotoimpex.de/shopen/dark...ray-scale-t2115-21-step-12-inch-x-5-inch.html

Or is there some other jobo step wedge I am unaware of? Am interested.

 

[nbagno]

I'm assuming the step wedge is this?

http://www.fotoimpex.de/shopen/dark...ray-scale-t2115-21-step-12-inch-x-5-inch.html

Or is there some other jobo step wedge I am unaware of? Am interested.

No sorry it's the leveling wedge for the processor. Now that I figured out what it is I'm going to keep it. Sorry to waste your time.

 

[calebarchie]

No sorry it's the leveling wedge for the processor. Now that I figured out what it is I'm going to keep it. Sorry to waste your time.

No worries, saved you from wrongfully selling something

How many nova printing clips do you have? I could be interested in one

 

[bdial]

Can you post more details about the Nova?
What size, how many slots, does it have a heater?

 

[nbagno]

No worries, saved you from wrongfully selling something

How many nova printing clips do you have? I could be interested in one

I think I should keep the clips with the processor in case someone want's the thing. Make me an offer for the whole thing

 

[nbagno]

Can you post more details about the Nova?
What size, how many slots, does it have a heater?

I doesn't have a size listed but I measured it physically and it's almost a foot tall and about 11 inches in width at the base. The instructions list several sizes so this one must be the 10x8 unit. Has 4 slots and looks like it has a heater. I haven't tested it yet. It has 2 print clips and a couple of plastic tubes that you can see on one of the pictures.

https://drive.google.com/folderview...A2N0JkYm1JNGZxQ3pPZUZmaGlRaXBweE0&usp=sharing

 

[calebarchie]

I built my own nova clone and could really use one of the clips without resorting to getting it from the UK. Any ideas? Local distributors?

 

[nbagno]

Was this the Jobo that was just on Craigslist?

Yes, and the list of all of the stuff he had. Jobo is the late model (3rd) and is really clean. :-D

 

[nbagno]

Going to pull this thread and list them separately. I may just post some of this as free soon.