For Sale CPA2/CPP2 Processor w/ Jobo Process Timer 16 + drums +

[LarryL]

I'm needing to clear out a lot of large format and darkroom stuff that I'm no longer able to use, so here goes.

CPA2/CPP2 Processor w/ Jobo Process Timer 16
extra CPP2 head (spare)
(12) 1000ml chemical bottles
(4) 600ml chemical bottles
Jobo Drums
(1) 1510
(1) 1520
(2) 1530
(2) 2850
(2) 2830
(2) 2820
(1) 2870 Module (extension)
(1) 3063 + extra top
(9) film reels
Misc. magnets & small parts

Asking $3,000.

Note regarding shipping: This processor + all the drums + spare CPP2 and bottles is bulky and will require packing that I will have done by a UPS store or similar. I have no idea what the actual packing and shipping cost will be to any specific location. I will PM the prospective buyer of the actual cost prior to shipping. If the cost is acceptable, buyer must remit payment before the shipment is released. The item may also be picked up in San Rafael, California.

I'll be also posting my Linhof Technica V gear, Nikonos V underwater cameras, a Saunders LPL 870 DXL dichro enlarger and Colorstar analyzer, lenses, an Omega Pro Lab II enlarger with ZBE Oriental VC-CLS head in addition tothe condenser head.

 

[LarryL]

bump

 

[StoneNYC]

How much for just CPP and Lift and bottles but no tanks?

 

[shutterboy]

A CPP3 sells for 2999$ from freestylephoto. You might want to reconsider the price.

 

[LarryL]

For now I prefer to sell as a package since that makes the best deal for a buyer and I don't really have time to sell parts. You can always make an offer on the package and sell what YOU don't want.

 

[LarryL]

Of course to that price you need to add the cost of all the drums before you have a working system.

And, I'm very open to reasonable offers.

 

[StoneNYC]

What if someone were upgrading their existing job and already had all of the parts except the machine? (Which is my situation).

 

[LarryL]

Understand. And I'm sympathetic to your problem. Just don't think it makes sense for me to create one for myself. Good luck though.

 

[StoneNYC]

Thanks, you too

 

[LarryL]

bump

 

[LarryL]

bump

 

[LarryL]

How about $2,500? Offers?

 

[LarryL]

Let's see if $2,500 feels better.

 

[shutterboy]

Let's see if $2,500 feels better.

Since you did not have any replies since the last reply, I suppose it doesn't

 

[LarryL]

bump

 

[LarryL]

bump

 

[wildbill]

I'm interested in 6 of the bottles if you wanna sell them.

 

[LarryL]

bump

 

[canuhead]

Might help if people knew what motor this processor has. If it's later serial number (I believe 2XXXXX) of a later upgraded motor, that will make a difference.

 

[LarryL]

I believe that both of the control heads are pre 2XXXXX series. If I recall correctly, and this was some years ago, I bought the second control unit, used, when I sent mine in to have the heating element replaced. I have no idea if either had ever been upgraded to the newer rotation motors. I never had any problems with them, but I have an Autolab also and haven't used the CPP for a long time.

 

[LarryL]

bump

 

[LarryL]

bump

 

[LarryL]

bump

 

[LarryL]

bump

 

[LarryL]

bump