Contax RTS II - Film Advance lever can't being moved

monopix said:

Most likely the shutter hasn't completed its travel so the mirror hasn't been released and the wind lock is still on. It needs a repair.

Click to expand...

monopix said:

The answer is it needs a repair so you need to find someone to repair it.

Click to expand...

Yashica said:

And this is exactly what i do know, before your post. No hard feelings.

Click to expand...

Andreas Thaler said:

One possibility would be to open the camera and see what is stuck where.

Click to expand...

Yosua said:

I had this exact same problem with other cameras, but the solution may be the same:
Most likely the shutter hasn't completed its travel because the battery died. It happens that when the battery is too weak, the battery would only work like a small capacitor with just enough power to start the shutting but not to finish it. Try to change the battery (and press the shutter again if the camera doesn't complete the shutting by itself) . You can also try to remove the battery and recharge it for one minute by connecting it in parallel with another source of current of same or slightly above voltage (like another battery) + to + and - to -. This has always worked for me.

Click to expand...

Yashica said:

Thanks for the info, appreciated. Well, the battery worked fine, but died off lately, right. I've to organize a new one.

Click to expand...

Yosua said:

Glad that it also worked for you!

Click to expand...

Yashica said:

I haven't check that ! I just meant, before the lever got stock, the battery died. So you might be right - and i have to get a new battery,
before i can verify this. Must have been a missunderstanding, no hard feelings.

Click to expand...

Yashica said:

Hi forum,

i've bought last month another RTS II after a hell long time, to have a spare copy. Well, it turns out, the film advance lever isn't being move-able.
And the mirror is always being stuck, means overlapping the focusing screen - so you can't see anything through the pentaprism...hence OVF.

I've tried with gloves *very subtle* to pull the mirror down, but it won't stay into it's usual way. And yes, it doesn't matter, into which position the "mirror-up" switch is - because the mirror stays always up.

Does someone know, how-to fix both issues? For testing purposes, i've put into a fresh battery, mounted my 35/2.8 distagon, and just turned the aperture ring...this is fully being recognized, the red 7 digit LEDs are showing the corresponding, correct aperture setting.

Otherwise, this RTS II does look from the film chamber, backdoor, lightseals, and outside mint, almost new. I wouldn't want to trash it. The film advance lever does feel really *hard* jammed, i can't move it a single mm.

Any help is greatly appreciated.

thanks,
Marc

Click to expand...

Chet Baker said:

I also think of what was suggested to you about the battery which may have drained out and blocked the camera.
Whatever the problem, I advise you to never touch the mirror and above all NEVER force it to move, you could deform its mechanism.

Click to expand...

Yashica said:

Same issue as before - with a fresh battery, my RTS II does always flashes 1/60s red, but showing the correct aperture, and the mirror is always up - doesn't come down again. I've had enough. Using my other RTS II.

Click to expand...

Chet Baker said:

It's a real shame because the RTSII is a great camera, for my taste perhaps the most beautiful 35mm and with a fantastic shutter release. I've owned two without the slightest problem.
Sorry for your troubles.

Click to expand...

OAPOli said:

Regarding the 1/60s behaviour, I seem to remember that the RTS II will display and fire at 1/60s until the counter reaches 1.

Click to expand...

Yashica said:

Yes, and what is worse - both look 95-97% like new, not a single scratch, dings or dent, or brassing, or edges with color off. It's a shame. But life's too short - i don't have time for this, and don't want to invest some 200 bucks to fix it. I've collected enough gear over decades, to use. Nikon, Contax, Yashica & Minolta, etc...i could shoot my Distagon with my 137 series, or S2b, for example.

Click to expand...

Yashica said:

And this is exactly what i do know, before your post. No hard feelings.

Click to expand...

Yosua said:

If the battery died before the lever got stock, then that’s it. The battery died, you press the shutter which causes the mirror to go up, then there is no electricity available for activating the electro-magnet that releases the shutter curtains. The shutting process is not terminated so the mirror is kept up, because it cannot be released before the end of the exposure otherwise it would obstruct, being in the path of the image formation system. Also the lever is blocked because it has already advanced the film enough to the next frame that has not yet been shut. Pushing the small end of film release bouton on the bottom of the camera may release the camera, allowing the film to be rewind, but don’t force anything or something can be broken!

Click to expand...

monopix said:

So why are you asking the question. You won't/can't fix it yourself. The ONLY answer you need is that you need to get it repaired.

Click to expand...

Yashica said:

No offense, you always seem to play hardball here, nevermind. FYI, i've known that i NEED to repair it, before asking here-by question(s).
It always seems, some freak-o-holics are hereby, and don't take anyting seriously. Nevermind.

godspeed.

Click to expand...

monopix said:

The RTSii has an electronic release. If the battery was dead, it wouldn't release at all. The electronic release releases the mirror, the shutter is released mechanically after the mirror has raised.

Click to expand...