- Joined
- Dec 10, 2004
- Messages
- 414
- Format
- Large Format
I've decided to start getting rid of some the stuff that I don't think I'll ever use. Maybe there is something here that you can make use of.
1. 180 mm Dopple Anastigmat DPR F6.8 - F64 lens. I assume that this is a Goerz, but the Goerz name isn't on it. Lens is in OK shape but the glass is a little hazy - nor sure if just needs cleaning or not. Lens is in an aluminum barrel/flange that I guarantee you will not be able to get it apart (I've tried). Mounted to a 6 x 6 board for a Kodak 8 x 10 2D. Covers 8 x 10 with slight movement - $35
2. 17" Wollensak Process Velostigmat F10 - F128 lens. Glass is nice and clear and appears to be coated. Covers 8 x 10 with lots of movement. Mounted to a 6 x 6 lens board for a Kodak 8 x 10 2D. Comes with leather lens cap. - $45
3 - 210 mm C. P. Goerz Dopple Anastigmat. Lens has had it's iris removed at some time in it's past life. Note that this lens has lead a very tough life in that it is real beat up on the outside. However, the glass is OK. I can't get the lens apart and there is dust inside. No mounting flange. This is definitely a "project" lens. $10
4 - Four misc. lenses that I would classify as "experimental". (A) 3 1/2" Wollensak Velostigmat in a Betax #2 shutter, glass OK, lens does not cover 4 x 5, (B) 135 mm F6.3 Rietzschel Linear Anastigmat in a cheap Vario shutter. Glass is good but shutter is stuck in half open position, covers 4 x 5, (C)6 1/2" no name Rapid Rectilinear lens in a cheap ultro shutter, glass OK. (D) 135 mm F4.5 Liesegang Parastigmat, Appears that it might be an enlarger lens but I'm not sure, Glass has blooming going on. $15 for all four.
5 - Three 4 x 4 lens boards that fit a besler enlarger. First is plastic and has a threaded hole that is about 38 mm. Second is painted metal that has a 30mm non threaded hole. Third is alluminum with a threaded insert that has about a 38mm hole. $5 each or $10 for all three.
1. 180 mm Dopple Anastigmat DPR F6.8 - F64 lens. I assume that this is a Goerz, but the Goerz name isn't on it. Lens is in OK shape but the glass is a little hazy - nor sure if just needs cleaning or not. Lens is in an aluminum barrel/flange that I guarantee you will not be able to get it apart (I've tried). Mounted to a 6 x 6 board for a Kodak 8 x 10 2D. Covers 8 x 10 with slight movement - $35
2. 17" Wollensak Process Velostigmat F10 - F128 lens. Glass is nice and clear and appears to be coated. Covers 8 x 10 with lots of movement. Mounted to a 6 x 6 lens board for a Kodak 8 x 10 2D. Comes with leather lens cap. - $45
3 - 210 mm C. P. Goerz Dopple Anastigmat. Lens has had it's iris removed at some time in it's past life. Note that this lens has lead a very tough life in that it is real beat up on the outside. However, the glass is OK. I can't get the lens apart and there is dust inside. No mounting flange. This is definitely a "project" lens. $10
4 - Four misc. lenses that I would classify as "experimental". (A) 3 1/2" Wollensak Velostigmat in a Betax #2 shutter, glass OK, lens does not cover 4 x 5, (B) 135 mm F6.3 Rietzschel Linear Anastigmat in a cheap Vario shutter. Glass is good but shutter is stuck in half open position, covers 4 x 5, (C)6 1/2" no name Rapid Rectilinear lens in a cheap ultro shutter, glass OK. (D) 135 mm F4.5 Liesegang Parastigmat, Appears that it might be an enlarger lens but I'm not sure, Glass has blooming going on. $15 for all four.
5 - Three 4 x 4 lens boards that fit a besler enlarger. First is plastic and has a threaded hole that is about 38 mm. Second is painted metal that has a 30mm non threaded hole. Third is alluminum with a threaded insert that has about a 38mm hole. $5 each or $10 for all three.
