bdial
Subscriber
Chris,
Contratulations! I'm pretty sure my first roll of 120 looked similar. No question that 35 is a bit easier.
I haven't looked at Jason's video, but it is much easer if you aren't handling the paper and loading the reel at the same time. I agree with Matt and Kevin, unroll it from the spool and paper first. When you get to the taped end, tear the tape at the seam between the film and paper, but leave the tape on the film. The extra stiffness will help you get it on the reel. Start the film onto the reel with the taped end, listen for creases starting, as Matt says. If you're using SS, you can count the wires on each side from the film out to verify if the film is going on correctly. If you count 4 on one side, and 5 on the other, for example, it means the film doubled on one side. Unwind until it's even again and continue. Do this at any point you have doubts.
I really like you're son's comment on the process, we should adopt it as a theme!
Contratulations! I'm pretty sure my first roll of 120 looked similar. No question that 35 is a bit easier.
I haven't looked at Jason's video, but it is much easer if you aren't handling the paper and loading the reel at the same time. I agree with Matt and Kevin, unroll it from the spool and paper first. When you get to the taped end, tear the tape at the seam between the film and paper, but leave the tape on the film. The extra stiffness will help you get it on the reel. Start the film onto the reel with the taped end, listen for creases starting, as Matt says. If you're using SS, you can count the wires on each side from the film out to verify if the film is going on correctly. If you count 4 on one side, and 5 on the other, for example, it means the film doubled on one side. Unwind until it's even again and continue. Do this at any point you have doubts.
I really like you're son's comment on the process, we should adopt it as a theme!
