Changing bag causing great strife!

Helton Nature Park

A
Helton Nature Park

  • 0
  • 0
  • 327
See-King attention

D
See-King attention

  • 2
  • 0
  • 545
Saturday, in the park

A
Saturday, in the park

  • 1
  • 0
  • 1K
Farm to Market 1303

A
Farm to Market 1303

  • 1
  • 0
  • 2K
Sonatas XII-51 (Life)

A
Sonatas XII-51 (Life)

  • 1
  • 2
  • 2K

Recent Classifieds

Forum statistics

Threads
199,756
Messages
2,796,173
Members
100,026
Latest member
PixelAlice
Recent bookmarks
0

Roger_Luo

Member
Joined
Jul 21, 2007
Messages
9
Location
Staffordshir
Format
35mm
The problem I see with most changing bags built-up static, sweating palms, crispy in the cold winter is to do with the material. Market available product most are made of Nylon. And this what causes problem.
A few years ago I found this nice old changing bag that made of traditional Cotton with anti-static treatment. I found it worked a treat. I recommend and help a few members in my photography club acquired some. Words by moth and the demand was good. I started selling them on the ebay.
You can see other user's comment by google Roger_Luo changing bag or visit my eBay. I've also listed it in the classified ((there was a url link here which no longer exists)).

I recently designed and put to market a tripod tent, it is bigger than Harrison pup at a fraction of the price

You guys that hated changing bag should buy one from me and give a decent unbiased comment.
 

harri129

Member
Joined
Sep 27, 2006
Messages
11
Format
35mm
It is the moisture that causes all the problems. Calming down and cooler weather helps. Loading one roll at a time helps. If it is hot and you have to use a changing bag you must deal with the moisture.

I've used silica gel which absorbs humidity (the usual desiccator bags you find everywhere). It makes a huge difference in the summer. Film won't get sticky because of the humidity when the air is dry. However, you might still have sweaty hands and you should avoid toughing the film as much as possible.
 

mwdake

Member
Joined
Aug 25, 2007
Messages
781
Location
CO, USA
Format
Multi Format
I use plastic reels.
For 35mm, I pre-load the leader into the reel so it catches on the ball bearings before going in to the bag. That way all I have to do is wind then put in tank.
You may need a film retreiver to get the end of the film from the 35mm cassette first

For 120, I cut a piece of card the same width as the 120 film from the film box and feed this into the reel first, don't feed it all the past the ball bearings. Now in the dark I slide the end of my 120 film along this card until it feeds in enough to start winding.

hth
 

CBG

Member
Joined
Nov 21, 2004
Messages
889
Format
Multi Format
If you get a steel reel and take the time to learn loading it you'll be happier. They are more dependable than plastic. At first they can be a pain to use but when you get used to them, they are a breeze.

C
 

f/stopblues

Member
Joined
Oct 6, 2005
Messages
214
Location
Midwest
Format
Multi Format
One little tidbit that seems to help me is that right before I go into the bag I wash my hands thoroughly with *cold* water, then dry them completely. Wait a couple minutes to get that extra bit of moisture to dry out and then go for it. It seems to buy a few minutes in the bag before things get sticky and of course clean hands on negatives is always good! I'm an advocate of stainless reels, fwiw. Good luck!
 
OP
OP

Mearns

Member
Joined
Dec 30, 2007
Messages
38
Location
New Zealand
Format
Medium Format
More great tips! I like the one about using card mwdake! Sounds like a plan! :D
 

stillsilver

Member
Joined
Jun 30, 2006
Messages
259
Location
Oakdale, CA
Format
Multi Format
I too have had the sweat problems in the warmer months. I'll be trying the cold-water hand wash trick in the future. TY
Mike
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom