Canon eos 300 slr - contax Yashica carl zeiss adaptor.
I was wandering if its possible. It would be good since canon eos body is dirt cheap and not that old. I have the contax 167mt body and need another body to keep black and white film in or just a different iso.
Unless you want to use Canon EOS lenses on it , I don't see the point .
Sure it's a cheap camera , but then add the cost of the adapter ( that model might require one with the chip ) , and it's probably going to cost you more than just buying either a cheap Contax body or one of the Yashica C/Y lens mount bodies .
These also sell for about £15 - £20 .
Apart from metering , you'll also retain automatic aperture stop down , and a much better focus screen / viewfinder .
Have you used an EOS 300? I have one, it is a great little camera however the viewfinder is awful for anything but auto focus. I have used all modern Canon bodies (300, 30, 3, 1N, 1V) and I would say that an EOS 3/1N/1V with an Ec-S screen are fantastic for manual focusing, plus you get all the bells and whistles for AF. The 30 would be a good one but it is incapable of stop down metering. The 300 will meter fine but focusing will be very tricky.
Have you used an EOS 300? I have one, it is a great little camera however the viewfinder is awful for anything but auto focus. I have used all modern Canon bodies (300, 30, 3, 1N, 1V) and I would say that an EOS 3/1N/1V with an Ec-S screen are fantastic for manual focusing, plus you get all the bells and whistles for AF. The 30 would be a good one but it is incapable of stop down metering. The 300 will meter fine but focusing will be very tricky.
Any time you use an adapter to put one camera mount's lenses on another body always force you to use stop down metering - a deal breaker for me for everything other than something like desktop photography.