Canon Dial 35 repair

[tobias]

Hi all,
I have a Dial 35 on my bench, half dismantled. I am not sure what its problem is, but I was wondering if anyone of you has any experience with these little animals, or has any suggestion on places to look.

I am currently stuck with the screws down the hinge which appear to be rather delicate and rather well stuck, so little damage has been done, so far.

Thanks in advance,
Tobias

 

[Anscojohn]

Hi all,
I have a Dial 35 on my bench, half dismantled. I am not sure what its problem is, but I was wondering if anyone of you has any experience with these little animals, or has any suggestion on places to look.

I am currently stuck with the screws down the hinge which appear to be rather delicate and rather well stuck, so little damage has been done, so far.

Thanks in advance,
Tobias

*****
Don't remember what hinge about which you are talking; but if the little stuck screws go into metal, and refuse to budge, try touching a soldering pencil to the screw head to heat it up a bit; then let it cool. Sometimes this will break the adhesion