Canon Demi EE17 Half Frame with lazy shutter

Alq · Jul 4, 2017

Hello, i have this recently acquired Canon Demi EE17. It works perfectly, but the shutter acts "lazy", as in, it works only after pressing it 2 or 4 times, when it does, it shutters fine, all speeds seem to be accurate, all the rest of functions act as they should. Any clues what this might be? Cheers.

shutterfinger · Jul 4, 2017

This is a Mercury battery camera. Mercury batteries have been discontinued in most of the world. A battery adapter for the camera needs to be acquired then use Silver Oxide batteries as alkaline batteries do not maintain correct voltage with age. Wein cells work but die quickly.
Try a fresh battery.

Alq · Jul 4, 2017

I have other Demis and they work fine without battery, it only feeds the lightmeter.

shutterfinger · Jul 5, 2017

Mechanical release: dried lubrication/dirty/out of adjustment/ wear are the likely causes. Time for a CLA (clean, lube, adjust).

taomeister · Jul 5, 2017

Does anyone work with these cameras for repair? I have a similar Canon Demi that could use a CLA.

shutterfinger · Jul 15, 2017

Stumbled across the repair manual(s) at http://www.kyphoto.com/classics/repairmanuals.html
be sure to follow the download instruction at the top of the page.

Canon Demi EE17 Half Frame with lazy shutter

Alq

shutterfinger

Alq

shutterfinger

taomeister

shutterfinger

Privacy & Transparency

Privacy & Transparency