Camera "gotchas"

Kino

Subscriber
Joined
Jan 20, 2006
Messages
7,781
Location
Orange, Virginia
Format
Multi Format
Love my Konica IIIA, but I always seem to forget to rotate the camera door latch from "O" to "C" after loading. Happened to me again; was out this weekend, walking around an outdoor mall in Charlottesville, Virginia. We went there ostensibly for a meal at a good restaurant and just to get out of the house. Took the Konica as it looked lonely on the shelf, quickly loaded it and headed out the door. At the mall, I grabbed about five shots before it started to rain, so we headed to the restaurant and got a table. I would have paid good money to have a video of my face when I carefully sat the camera on the table and the back popped-open as pretty as you please, exposing all my previous shots to broad daylight. I have to put a tag on this camera to remind me to check the door latch after loading.

My other "gotcha" is the placement of the shutter release on the Kowa 6. It's just in the natural place to grab the camera body when you pick it up, so I have quite a collection of blurred shots of my shoes and diembodied legs. Have to find a later hand grip for the later Kowa 6 versions that physically blocks the release and prevents accidental tripping of the shutter. Locking and unlocking the shutter release ring is cumbersome and a pain...

What are your camera-specific "gotchas"?
 

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,608
Location
La-la-land
Format
Multi Format
Always a fun topic!

The biggest gottcha for me is remembering which way the film goes on the take up spool in a Kodak Retina. After decades of the Nikon “underhand” spooling it’s become second nature which, of course, I apply too often to the Retina’s “overhand” spooling. Should be simple to remember but…
 

AnselMortensen

Subscriber
Joined
Jun 9, 2020
Messages
2,521
Location
SFBayArea
Format
Traditional
The two-stage film door lock on my Canon P always trips me up.

My large-format Wollensak shutters require a long-throw cable release...which guarantees that I try to use a short-throw one first.
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,475
Location
North East U.S.
Format
Multi Format
loading a Rolleiflex with the automatic film sensing bites you if you forget to feed the film under the roller. Close the back, and start winding, then wind some more, realizing what you did, and the only choice is to keep going to the end of the roll.
 

GRHazelton

Subscriber
Joined
May 26, 2006
Messages
2,249
Location
Jonesboro, G
Format
Multi Format
I've also done the Konica IIIa "surprise"! No fun at all.
 

GRHazelton

Subscriber
Joined
May 26, 2006
Messages
2,249
Location
Jonesboro, G
Format
Multi Format
Fortunately I have the "everready" case for my Konica IIIa, so I have some hope of averting the dreaded flying open back, if I remember to put the camera in the case, which is dreadful condition, indicating that it has done its job of protecting the camera. Enjoy your IIIa! It is a marvelous machine.
 

Cholentpot

Member
Joined
Oct 26, 2015
Messages
6,764
Format
35mm
Argus C3. The shutter cocking lever always hits my fingers on the way up.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,332
Location
North Carolina
Format
Multi Format
My Welta Weltini II (35 mm folder;, ca. 1941) has a couple gotchas. First, the bed latch is right next to the film advance release on the bottom of the body, meaning about half the time when I want to open the lens I wind up releasing the advance (not a huge problem, it won't go anywhere without prompting). Second, there are three protrusions on the side of the lens: the focus knob, retrofitted flash sync socket (which seems to have replaced the cable release socket, which I'd get a lot more use out of), and something else (don't have the camera with me at the moment) -- of which only the focus knob will move and focus the lens. Third, the bed can't be folded with the shutter cocked, or you'll bend over the cocking level if you aren't quite gentle.

Also, the camera is prone to popping open if carried in a pocket (which can make it very interesting to either reclose or work out of the pocket). And if that doesn't happen, the shutter release on the body can get depressed enough to trigger the double exposure lock, leading to a blank frame.

Finally, the rewind is a knob, rather than a crank, and it takes forever to rewind 36 exposures, leading me to open the camera back before all the film is back in the cassette on more than one occasion...

Still my favorite EDC camera, though -- small as a Rollei 35, doesn't need a separate lens cap (because it's a folder), and the Xenon f/2 lens is the best I've ever seen on a folding camera.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,332
Location
North Carolina
Format
Multi Format
cowanw said:
My glitch was always forgetting to set the Maximum aperture when I changed lenses on a Topcon Unirex
Click to expand...

Nikkormats (and presumably Nikons) before AI had that, too.
 

c41

Member
Joined
Jul 21, 2016
Messages
236
Location
Aus
Format
Analog
The Hasselblad shutter press -> dark slide removal is a well trodden path. I know I've walked it many times anyhow.
 

Disconnekt

Member
Joined
Jul 24, 2017
Messages
532
Location
Inland Empire, CA
Format
Multi Format
When shooting rerolled 120 film onto 620 spools in my Kodak Monitor 620, all the horizontal shots are upside down because like a good chunk of folding cameras, the film goes from right to left
 

ant!

Member
Joined
Dec 13, 2017
Messages
423
Location
Montreal
Format
Multi Format
When using (Kodak) 220 film, aligning the start mark to the first dotted line instead of the correct start line a bit after that... Ok, probably that will not happen again now.

With non-auto lenses on the Praktina, forgetting to stop down the lens after focusing (not an issue with the non-SLR cameras, bit of course I tend to focus with an SLR wide open...). And of course this is not related to this camera, but every lens before (semi-)auto became the norm.

In my really early days with manual film cameras (after started young with AF): rewinding without pressing the film release knob.

Still happening: Messing up to have the 35mm film correctly inserted in the spool and realizing this late in what I though is mid roll. Happened last on the Canon Demi EE17, and of course on a halfframe even with a 24exp film it takes a while to realize that this film is unusual long. Should look more on the turning rewind crank when advancing...
 

bluechromis

Subscriber
Joined
Sep 11, 2015
Messages
684
Format
35mm
Speed Graphic: thinking you have the leaf shutter enabled, but you really have the focal plane shutter enabled, resulting in unexposed images. (Using rangefinder) You'd think I could tell the difference in the sound of the shutter, but there's a learning curve with a Speed. There is also remembering to open and close the film holder's dark slide at the right time.
 

loccdor

Subscriber
Joined
Jan 12, 2024
Messages
1,585
Location
USA
Format
Multi Format
I ruined most of a trip's photos with a Canon T90 by not remembering that the lens needed to be set to Automatic when I was using the dial on the camera to set the aperture in Av mode. I had just taken a 10 year break from photography and was pretty rusty. Everything got shot wide open but exposed for the camera's set aperture, so almost everything overexposed and soft. Rest in peace to 200 pictures.

Could have been prevented if I did a test without film and watched the aperture, something you should do with old lenses anyway, to see if the aperture mechanism hasn't failed.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,332
Location
North Carolina
Format
Multi Format
c41 said:
The Hasselblad shutter press -> dark slide removal is a well trodden path.
Click to expand...

RB67 has a lockout for that, at least as long as body and film back are Mamiya made and ProS or newer. If you're using older pieces, on the other hand, or other brand film backs...
 

Bronson Dugnutt

Member
Joined
Dec 29, 2018
Messages
982
Location
USA
Format
Traditional
The Nikon FM(2)'s shutter lock mechanism being integrated into the advance lever... is that ever annoying. It gives me a trite excuse to use a Nikkormat or FG-20 instead and so adds some utility to those bodies.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,417
Location
Southern California
Format
Multi Format
Graflex: Open lens shutter to use the focal plane shutter, pull the dark slide, cock the focal plane shutter -- @XXCT@#@@@!!!!!!
 

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,582
Location
USA
Format
Multi Format
Kino would know...there are hundreds of things that can go wrong here...
I think the most common error is the focusing lens (upper) is not the one that takes the movie. The taking lens is the middle one.
Then the aperture has to be set based on a shutter speed 2.5 times the filming speed.
The viewfinder needs to be set for the same focal length as the taking lens.
The parallax knob on the viewfinder needs to be set the same as the lens distance indicator.
Oh, did the subject move...start over...
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,417
Location
Southern California
Format
Multi Format

What about leaving the lens cap screwed on to the middle lens as in this above photograph?
 

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,582
Location
USA
Format
Multi Format
Sirius Glass said:
What about leaving the lens cap screwed on to the middle lens as in this above photograph?
Click to expand...
Yes that too!

However, that picture is the 'storage' position as I only have one cap. Those three Kern Switars in D mount are somewhat rare, most dual 8 Bolex were sold with the the 3-element Kern Yvar lenses, which take a smaller cap (see below).
The Switar lenses on my camera are 6 and ten element. Yes that f0.9 12mm Switar with the cap is ten element!
I have been looking for years for a cap for the 36mm Switar. Even considering buying another lens just for the cap and selling the lens.
Also, all the C mount lenses for the 16mm cameras use a bigger cap that won't fit.

 
Last edited:

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,582
Location
USA
Format
Multi Format
Cholentpot said:
Right. So I have one of my arguseseses in my hands now. How do you flip the switch?
Click to expand...

There should be a locknut under the lever so you can loosen that, put the lever where you want it, and re-tighten the nut. You will need a very thin open end SAE wrench. Oh yes, the threads are reversed!
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…