C-41 Final Rinse

[2F/2F]

Theoretically, that's where it should be put. In reality, I think many members, perhaps the majority, don't even know that there's an article section.

Their loss! It is sometimes a most helpful section.

 

[HelenOster]

Thank you so much for letting me know - I will certainly get it addressed.

PS It has now been changed....

 

[Brian B. Ainsworth]

In our commercial photo lab, c-41 Dip N' Dunk processor, we use Kodak Stabilizer III - a very, very small amount is needed. As our stabilizer tank is 8.8 gal, and an additional amount is added after each rank of film passes; it would be hard to give you what your mix should be.

 

[mtjade2007]

I have two notes I made about the formula of the stabilizer. Here is the first:

27 ml 37% Formalin
2 - 5 ml wetting agent (Photo Flo)
water to make 1 liter

Here is the 2nd and this was given by PE:

Mix 1 liter Photo Flo
Add 10 ml 37% Formalin

I don't know why there is big difference in the amount of Formalin used. I guess it is not critical anyway.