Blue bottles vs Amber bottles

Cool

A
Cool

  • 0
  • 0
  • 0
Coquitlam River BC

D
Coquitlam River BC

  • 1
  • 0
  • 30
Mayday celebrations

A
Mayday celebrations

  • 2
  • 2
  • 70
MayDay celebration

A
MayDay celebration

  • 2
  • 0
  • 73

Recent Classifieds

Forum statistics

Threads
197,559
Messages
2,761,044
Members
99,403
Latest member
BardM
Recent bookmarks
0

alexhill

Member
Joined
May 22, 2010
Messages
174
Location
New Hampshir
Format
4x5 Format
Should I be worried about using blue dropper bottles for storing photochemistry that doesn't specify being kept of of direct light? I'm talking about cyanotypes A and B specifically..

Also, is silver nitrate in solution something to worry about? I've read about 'sunning' the solution to cause organic material to precipitate so I'm guessing its OK, but I'd rather double check then screw up.
 
Joined
Dec 10, 2009
Messages
6,297
Format
Multi Format
I would think a blue bottle would not be good. Silver photographic materials are sensitive to blue light. Amber would probably be a better choice.
 

bobwysiwyg

Subscriber
Joined
Mar 28, 2008
Messages
1,627
Location
Ann Arbor, M
Format
Multi Format
I'm just curious, having seen references to brown bottles, etc. in the past, does it matter one way or the other considering that most of us probably store them in a dark closet or storage area and rarely use them in direct sunlight anyway?
 

Andrew Moxom

Member
Joined
Feb 2, 2007
Messages
4,888
Location
Keeping the
Format
Multi Format
for collodion work, I keep my silver nitrate bath in a clear plastic container for safety. I pour my silver bath into this container and filter it when I do every time I use my wet plate set up. Every two weeks, the bath gets 'sunned' to make sure any contaminates precipitate out to the bottom, and any ether/alcohol components can evaporate off. After this, the silver bath is filtered again, prior to going back into the actual sensitizing tank. For collodion work this silver nitrate/ distilled water solution will not change color in clear containers. It's when the salted collodion coated plate is immersed into the silver bath that the silver/collodion emulsion becomes light sensitive. For obvious reasons, the sensitizing tank needs to be light proof. There are many that think storing in plastic makes sense safety wise incase the bath is dropped, but others store their silver baths in glass... YMMV.
 

Mike Wilde

Member
Joined
Aug 10, 2006
Messages
2,903
Location
Misissauaga
Format
Multi Format
I use both blue and amber. If something is particularly sensitive, ala Cyanotype sensitizer, I wrap the glass bottle with black electrical tape.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Clear bottles will not hurt. After all, your darkroom isn't sunny, nor is it lit most of the time if it is like mine.

I use a mix of clear and colored bottles simply because that is what is available, not because it is necessary.

PE
 

nworth

Member
Joined
Aug 27, 2005
Messages
2,228
Location
Los Alamos,
Format
Multi Format
The reason for using amber bottles is to filter out blue and ultraviolet light which can react with photosensitive solutions like silver nitrate. With silver nitrate, it causes silver metal to slowly separate out of the solution. That can result in blobs of solid material in your coatings.) Blue bottle would allow the nasty blue light in. But for practical purposes, it probably won't make any difference. That is especially true if you keep the bottle in a cupboard and have incandescent lights. I've seen clear bottles of silver nitrate solution that have sat on a lab shelf for years without deterioration.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
For all practical purposes, there is little UV or blue light indoors under tungsten light. Tungsten is heavier in red than in blue or UV but there is some. Fluorescent lighting is heavier in the green, blue and UV.

PE
 
OP
OP

alexhill

Member
Joined
May 22, 2010
Messages
174
Location
New Hampshir
Format
4x5 Format
Awsome, thanks for the info guys. I've been reusing grolsh bottles and their bigger brothers that I buy at the beer shop. The releasable mason-jar like caps are awesome.
 

Anscojohn

Subscriber
Joined
Dec 31, 2006
Messages
2,704
Format
Medium Format
Grolsch, howemsoever, can deteriorate if left in bottle tool long after leaving the beer mart. Do Empty them quickly at home.
 

bobwysiwyg

Subscriber
Joined
Mar 28, 2008
Messages
1,627
Location
Ann Arbor, M
Format
Multi Format
I've been using empty (cleaned of course) plastic peanut butter jars, the larger 40 oz. size. I have them marked for 35 mm one and two reel tanks and the full monty for my CombiPlan. I've been shooting 4x5 mostly, but either way I fill them from 1 gal. containers that have the dev, stop and fixer. It can be a few days to two weeks before I use them, but I know they are all the same temp. when I do, and the smaller quantities can be temperature adjusted more easily if needed in the winter.
 
Joined
Aug 8, 2012
Messages
4
Format
Instant Films
Yes...amber bottles should be preferred to store photochemistry. They are dark in color mostly of brown or orange color and used to protect substance inside from harmful sun rays and UV rays. But if you are storing them in dark room you can also use dropper bottles.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom